No picture on 58" plasma TV
TV model no. is TH-58PE75U ..it has no picture...few minutes after powering it on, the led starts blinking and it blinks for about 13 times ....I found Factory service manual and it says
Communication error with IC8001(Pesks lite 2)
and check board A and board part no. is TNPH0692ADS Or TNPH0692(1)A
So I concluded that ...we need to replace A board....
....but..am not tech at all...I just read the manual and concluded that I should replace board......but before I buy the board and replace it...
I would like an advice on if replacing board is really necessary or something else can cause this 13 blinks? what else I should look for?
Just replacing board will solve the problem? or it will solve temporarily and problem will start again?
PLEASE advice as am nieve and dont have money to pay the shop to fix it..
Also where can I buy this board in case I need to replace it?
Communication error with IC8001(Pesks lite 2)
and check board A and board part no. is TNPH0692ADS Or TNPH0692(1)A
So I concluded that ...we need to replace A board....
....but..am not tech at all...I just read the manual and concluded that I should replace board......but before I buy the board and replace it...
I would like an advice on if replacing board is really necessary or something else can cause this 13 blinks? what else I should look for?
Just replacing board will solve the problem? or it will solve temporarily and problem will start again?
PLEASE advice as am nieve and dont have money to pay the shop to fix it..
Also where can I buy this board in case I need to replace it?
Comment