Insignia NS-32L240A13 NO POWER

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NasTech
    Senior Member
    • Sep 2011
    • 58
    #1

    Insignia NS-32L240A13 NO POWER

    Hello

    I check the Power supply found two short MOSFET SMK0825 Replace them with FQPF9N25CYDTU I getting my 5Volts on pin 5Vsb and pin 5V1 reading 2.7volts. How can i startup the Power supply without the Main board because when i connect the main board standby voltage fluctuate between 1 - 2volt. No standby light.

    Please Help
    Attached Files
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Insignia NS-32L240A13 NO POWER

      To test without main board you can run a 100 to 470 ohm resistor between PON and 5VSB.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • NasTech
          Senior Member
          • Sep 2011
          • 58
          #3
          Re: Insignia NS-32L240A13 NO POWER

          Did that same results like when i connect the main board stand by voltage drops. What can be stoping the PS from turning on

            Comment

            • NasTech
              Senior Member
              • Sep 2011
              • 58
              #4
              Re: Insignia NS-32L240A13 NO POWER

              Any info diagram or schematic drawing for this Power supply 6MF00320A0


              Thanks

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • PantherDave
                  Microsoft Surface Pro (5th gen) model 1796 - no power
                  by PantherDave
                  Hi all!

                  I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                  I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                  https://www.badcaps.net/forum/troubl...-hardware-devi...
                  05-29-2024, 02:01 PM
                • GLISIT
                  Asus Probook P5440UF-XB74 power issue
                  by GLISIT
                  Hi all,

                  TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                  I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                  A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                  01-16-2025, 02:29 PM
                • cajoeg
                  Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
                  by cajoeg
                  Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

                  The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
                  02-10-2025, 04:01 PM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • Loading...
                • No more items.
                Working...