Announcement

Collapse
No announcement yet.

Polaroid TA01511C

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Polaroid TA01511C

    Picked this tv up for free today, presented as totally dead, no standby light, no response from power button. On visual inspection after dissasembly I saw two bloated caps on the power board. A 680uf 10v and a 1500uf 10v, I replaced them both with Nichinons. I will have to order in a replacement 1500 as the ones I had were 35V and too tall and 6.3v cuttin a bit too close on a 5v rail. So I used a 1000uf to see if it would work. Upon plugging it back in I got a standby light and pushing the power button it turned right on. Always gratifying to get an easy one every now and then. For some reason the Model Number didnt show up right it is actually a TLA-0511C


    Last edited by Caleb; 10-24-2013, 10:19 PM.
    Liberating magic smoke one part at a time
Working...
X