hi again got another set in this had blown caps on psu I replaced them but still the standby flicks to green then back to red
now the only caps I changed were the 3300uf 10v's
I know in the kit its says relace the 680uf 50v and the 100uf 50v
I tested voltages from psu with parts z and y disconnect
all checks out apart from vs and va very low 2-3 volts only
any ideas
now the only caps I changed were the 3300uf 10v's
I know in the kit its says relace the 680uf 50v and the 100uf 50v
I tested voltages from psu with parts z and y disconnect
all checks out apart from vs and va very low 2-3 volts only
any ideas
Comment