Sharp LC-32SB24U dead except for blinking green light

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ryan74
    Badcaps Veteran
    • Oct 2012
    • 471
    • usa

    #1

    Sharp LC-32SB24U dead except for blinking green light

    I got this LCD tv and it has been opened and damaged by someone (see pic).
    All it does is flash green at the front power led.

    The plastic cap is missing from the damaged part in pic so I don't have a part number.
    Can someone help identify this part so I can attempt to get the power board working?
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Sharp LC-32SB24U dead except for blinking green light

    That is/was a relay.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • ryan74
      Badcaps Veteran
      • Oct 2012
      • 471
      • usa

      #3
      Re: Sharp LC-32SB24U dead except for blinking green light

      Originally posted by tom66
      That is/was a relay.
      That is what I thought but I never had one open.

      Now I just have to figure out the specs for ordering unless someone can help with that also.
      Board # is: RUNTKA397WJQZ
      (Substitute Parts: RUNTKA448WJQZ)
      part loc.: RL7101

      I found a pic that shows LN on top of the relay but couldn't see the sides of part for markings.
      Last edited by ryan74; 09-04-2013, 05:37 PM.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Sharp LC-32SB24U dead except for blinking green light

        Can you show the underside of the relay? May not be able to locate exact replacement, but can find one that's good enough.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • ryan74
          Badcaps Veteran
          • Oct 2012
          • 471
          • usa

          #5
          Re: Sharp LC-32SB24U dead except for blinking green light

          I had trouble getting a good clear pic sorry.

          Edit: I found a relay on another board from a plasma with the same spacing for soldering but not sure it is ok to use. see second pic.
          Attached Files
          Last edited by ryan74; 09-04-2013, 06:22 PM.

          Comment

          • ryan74
            Badcaps Veteran
            • Oct 2012
            • 471
            • usa

            #6
            Re: Sharp LC-32SB24U dead except for blinking green light

            I put the relay in to try and nothing changed. Still getting a green blinking light in front as soon as I plug in the cord. Same thing when I press power button.
            If you think that relay should work I will start checking fets.
            Last edited by ryan74; 09-04-2013, 06:47 PM.

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #7
              Re: Sharp LC-32SB24U dead except for blinking green light

              You should check the voltage of the relay coil to see if is getting the voltage from the switched transistor or not, then also find out the voltage of the supplying to see if it is 5V or 12V or 24V. The coil voltage of the sub relay is rated at 5VDC.
              Post good clear pictures of the board both side of the whole board and in small sections.
              Service manual:
              http://elektrotanya.com/?q=showresul...oria=&kat2=all
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              Related Topics

              Collapse

              • shahnld
                Sony kdl 65xg9505 green amber blinking
                by shahnld
                Good Day.

                I just replaced tcon on my sony kdl 65xg9505 and getting green amber leds blinking. all voltages are ok according to working sequence.

                i downloaded firmware from sony and there is no .pkg fike.. after extracting it gives another file which contains multiple files like inf, payload.bin and 3, 4 other files. i just did that usb but did not worked. anyone knows anything how to do it..?

                green amber blinking stops after while and then starts again. tv responds to remote control on off etc. before installing new tcon backlite was coming on without backlite...
                01-03-2024, 03:05 PM
              • jxrepman
                Asus X453MA won't turn on and green led light blinking
                by jxrepman
                Hi there,

                I have this ASUS X453MA Laptop that's not turning on. When I plug in the charger, the green light just keeps on blinking and pressing the power button does nothing.

                I have checked the charger and it is giving 19+ V

                I have disconnected the battery and pressed power button for 30 seconds.

                I tried another RAM stick.

                Tried disconnecting the keyboard and touchpad.

                Tried disconnecting the HDD and the wifi adapter.

                The problem persists.

                Hope you could help me out on this one. Thank you.
                12-14-2024, 06:40 AM
              • bajdik
                Sharp LC-40LE830E white blinking after wallplug is off
                by bajdik
                Hello, on Sharp LC-40LE830E is everything OK. Working great. If I put the 230 V off and on again, it just blinking white standby LED. I can power on only via VOL- and CH+ and POWER button on TV. After that, I can power off and power on again without problem (by buttons or remote control) until the 230 V is connected. If i put the plug off and on again, just white standby LED blinking. TV needs three button starting again.. On the first look, the backlight looks great, no darker or lighter spots. Any idea what is wrong?
                07-21-2023, 09:05 AM
              • arctor
                tv metz 55tw46 red and green blinking
                by arctor
                hi guys, i have a metz tv model 55tw46 solea 55-media r. when i try to turn it on the led tv blinks in red and green.i read it s a softwareproblem, i went to the site fo metz and download the firmware but also if i put the usb in the tv, it doesnt start the upgrade firmware. do you have a way to fix it? the main board have this code 613gl0960.a7...
                03-21-2025, 01:51 AM
              • naddaw000
                Toshiba 55U7863DG - green light blinking (17MB130S)
                by naddaw000
                Hello, I am trying to bring back to life my Toshiba 55U7863DG, which has never been the most reliable device - keep on annoying me with its slowness and some random start-up/shutdown issues requiring to unplug the AC. But yesterday it finally said goodbye and decided to not turn on again. Green light is blinking, I've seen this behaviour before and thought that these are some temporary whims again, but unfortunately not this time.

                I have checked that my TV is build based on the 17MB130S board, which seems to be quite popular and easy to buy as a used one. Still I would like to ask...
                12-02-2023, 01:35 PM
              • Loading...
              • No more items.
              Working...