Searching for a Transformer Vizio VO370m FSP172-2MS01 Power Board.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dabone
    Member
    • Aug 2010
    • 30
    #1

    Searching for a Transformer Vizio VO370m FSP172-2MS01 Power Board.

    I'm trying to find a compatible transformer for a Vizio VO370m.
    This one has a FSP172-2MS01 power board, and uses 8TC00507 02GP transformers.

    The transformer has a 6 pin / 4 pin configuration.





    11 ohm on the primary.

    1770 ohm on the secondaries.

    This thread has the same issue.

    https://www.badcaps.net/forum/showthread.php?t=24585

    I've not been able to locate a cross or even the original.

    Thanks.
    Last edited by dabone; 08-22-2013, 10:48 AM.
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: Searching for a Transformer Vizio VO370m FSP172-2MS01 Power Board.

      Is the winding on the right side burnt? 1770 Ohms on both high voltage windings?
      Are you getting the same readings on the other transformer?
      Last edited by budm; 08-22-2013, 01:59 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • dabone
          Member
          • Aug 2010
          • 30
          #3
          Re: Searching for a Transformer Vizio VO370m FSP172-2MS01 Power Board.

          On the one pictured the windings on one side are burnt.

          I removed and checked all 5 transformers, and got my values from the other 4.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • Hakuu
              LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
              by Hakuu
              Hi There,

              This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

              After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

              More Details

              TV Model - LG OLED77G1PUA

              Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
              07-12-2023, 02:37 PM
            • jb_Bak
              Sony xbr-65x900c main board issues?
              by jb_Bak
              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
              Power Board Connector that goes to Main board
              CN6401
              Pin 01 NC
              Pin 02 NC
              Pin 03 "BL_ON": 0V
              Pin 04 "N/C"
              Pin 05 "STBY 3.3V": 3.5V
              Pin 06 "GND": N/C
              Pin 07 "AC_OFF"...
              09-27-2021, 04:52 PM
            • canadaboy25
              Panasonic TC-P54VT25 No image. A or D board?
              by canadaboy25
              I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

              The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

              I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
              01-17-2021, 01:06 AM
            • Loading...
            • No more items.
            Working...