Tosiba 37CV5050D, Sound but no Picture

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • keithf2
    Senior Member
    • Aug 2010
    • 131
    #21
    Re: Tosiba 37CV5050D, Sound but no Picture

    Yes have done that and its ok. The pictures I sent was from the wrong TV, see the new ones.
    Attached Files

      Comment

      • keithf2
        Senior Member
        • Aug 2010
        • 131
        #22
        Re: Tosiba 37CV5050D, Sound but no Picture

        have checked on Q1 to Q4, with the following readings

        Q1 and Q3 have 24volts on the top tab.
        Q2 and Q4 0 volts.All other terminals are at 0 volts.
        Q3 has one terminal directly connected to the transformer directly inline with it.

          Comment

          • keithf2
            Senior Member
            • Aug 2010
            • 131
            #23
            Re: Tosiba 37CV5050D, Sound but no Picture

            Whats happened, everyone on vacation ??.

              Comment

              • keithf2
                Senior Member
                • Aug 2010
                • 131
                #24
                Re: Tosiba 37CV5050D, Sound but no Picture

                have not had any feedback for several days now, does this mean, no one knows about this TV.

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA
                    #25
                    Re: Tosiba 37CV5050D, Sound but no Picture

                    I would try disconnecting (vbra) pin 11 and pin 13 to see what happen.
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment

                      • keithf2
                        Senior Member
                        • Aug 2010
                        • 131
                        #26
                        Re: Tosiba 37CV5050D, Sound but no Picture

                        Ok problem solved it was the inverter board, found one from my stock that would do. Thanks for your help.So this thread is closed.

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • TR103
                            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                            by TR103
                            Hi, I have a Samsung UE50TU with:
                            - sound and backlight, but no picture
                            - when it arrived, it had a picture for a few seconds
                            - it keeps rebooting
                            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                            - without cable between mainboard and lcd panel and with a jumpered...
                            01-22-2025, 04:12 PM
                          • Mgiffune
                            Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                            by Mgiffune
                            I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                            I ordered a supposedly ‘new' Tcon board this time, and                            ...
                            06-09-2024, 10:28 AM
                          • Ierwin
                            Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
                            by Ierwin
                            Hello everyone,
                            Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
                            The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
                            He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
                            I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
                            Anyway I still fully expect that there has been something seriously damaged...
                            05-13-2025, 03:31 PM
                          • jchang
                            Samsung UN70NU6900F no picture and no sound
                            by jchang
                            Hi all

                            I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



                            Symptom:
                            No picture no sound.
                            When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
                            No sound at all.



                            What I tried:
                            1. I tried unplugging the left or right ribbon...
                            01-09-2023, 06:28 PM
                          • ChaosLegionnaire
                            what i went through dealing with my mobo with dead onboard sound!
                            by ChaosLegionnaire
                            so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

                            i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
                            09-13-2022, 09:02 AM
                          • Loading...
                          • No more items.
                          Working...