Announcement

Collapse
No announcement yet.

LG 42PC1D-EC with blown fuse and bad caps

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    LG 42PC1D-EC with blown fuse and bad caps

    I have purchased an LG 42PC1D-EC that has 9 bulging caps on the power supply board and F2 250V 4A blown fuse on the ysus board. Could the bad caps be responsible for the blown fuse on the ysus board or should I be looking for something else?
    Any advice is greatly appreciated.
    Tags: None
    #2
    Re: LG 42PC1D-EC with blown fuse and bad caps

    The bad caps probably didn't cause the fuse to blow but it's likely that their high ESR over time killed something that caused the fuse to blow. It would help to post some high quality pictures

    Comment

      #3
      Re: LG 42PC1D-EC with blown fuse and bad caps

      It's possible that you have two separate issues. This PSU repair kit may correspond to your blown caps: http://www.ohmsupplies.co.uk/REPAIR-...-2300KEG002A-F

      I'd get the PSU running again then diagnose the Y-Sus.
      LG Plasma Mal-Discharge Correction Service

      Comment

        #4
        Re: LG 42PC1D-EC with blown fuse and bad caps

        Thanks for the replies. I have caps ordered and hopefully here tomorrow. Once I have the PSU repaired should I replace the blown fuse and try again?

        I noticed another post with similar problems to mine here
        https://www.badcaps.net/forum/showthread.php?t=30613, is it highly probable that I have the same issue with the ysus?

        Comment

          #5
          Re: LG 42PC1D-EC with blown fuse and bad caps

          What is the part number of your Y-Sus? If it uses an IPM, then I'd say you have the same issue. Like I mentioned in that thread, there's also a possibility you have other damage on the Y-Sus.
          Last edited by capkid; 08-08-2013, 05:02 PM.
          LG Plasma Mal-Discharge Correction Service

          Comment

            #6
            Re: LG 42PC1D-EC with blown fuse and bad caps

            Y-sus part number is 6870QYH005B

            Comment

              #7
              Re: LG 42PC1D-EC with blown fuse and bad caps

              Ok, yes, I'd say you most likely have the same issue.

              There may better sources for replacement parts in UK, but here are a couple links:

              http://www.ebay.co.uk/sch/i.html?_tr...at=0&_from=R40

              http://www.ebay.co.uk/sch/i.html?_od...5-821&_sacat=0

              I've used startboy1010 on eBay numerous times.
              Last edited by capkid; 08-08-2013, 06:30 PM.
              LG Plasma Mal-Discharge Correction Service

              Comment

                #8
                Re: LG 42PC1D-EC with blown fuse and bad caps

                Many thanks for your advice, I'll check out your video on how to fit the part and weigh up my options.

                Comment

                Previous template Next
                Working...