With this Olevia 242-S11 I just got up and running, how would I update the firmware? If I have no problems with the TV at all, what would be the advantages, if any, of updating the firmwre?
Thanks.
Thanks.
-
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...08-11-2025, 02:14 PM -
I'm currently repairing an MSI Vector GP66 12UHSO laptop with a motherboard reference MS-15441 ver 1.0. The EC chip (ENE KB9548QF2) on the board appears to be damaged and needs to be reprogrammed.
Can someone please send me the firmware (EC/Embedded Controller) or indicate where I can download the correct EC firmware version corresponding to this motherboard model?
I already have access to the BIOS downloads on the MSI support page, but need specifically the EC binary or its equivalent firmware image.
I already downloaded the BIOS update file from msi official... -
Hello Badcaps Community,
I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.
The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any... -
Hi,
I have a flashing green/red light on this model which then goes to fixed red. No display whatsoever. Voltages at the power supply look OK, so I'm guessing it is a motherboard/firmware issue.
I've downloaded the firmware for the model and serial number which contains three files:
mb130_en_bin.gz
mb130_PM51_connected.bin
mb130_RomBoot.bin
usb_auto_update_g10.txt
Looking at the script file, it look like it wants mb130_en_bin.bin, which is inside the .gz, so I'm guessing I need to extract that before trying to flash?...12-01-2022, 03:35 AM -
Hello,
I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.
However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...