Help needed with MT230DW01 V.0 InnoLux LCD Screen

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • craigc15
    Senior Member
    • Jun 2012
    • 53
    • USA
    #1

    Help needed with MT230DW01 V.0 InnoLux LCD Screen

    In the process of replacing a switcher chip on the display driver board for this screen, I inadvertently lost an adjacent capacitor.
    If anyone can tell me what the capacitance of C230 is, I would be eternally grateful, to say the least!

    If anyone has a cracked MT230DW01 V.0 InnoLux LCD Screen and they would be willing to remove the driver board and send/sell it to me, that works, too!

    Thanks!

    Craig
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • Kiberge
      Samsung LH82QENELGC/EN Help needed - Static line on screen
      by Kiberge
      HI guys!

      I've got a Samsung LH82QENELGC/EN with a problem and need some advice and I hope this is the forum to use?
      I'm from Norway so I'd like to apology in advance if my description of the fault is kind of simple or the names on the components are way off. 😊

      the TV is powering up, working as normally and picture is all good, except a 1.5-inch-wide vertical line of snow/static across the screen.


      This TV is a Signage Display/Public Display version and it's been used at my work for 4-5 years showing commercials 24/7. The fault occurred when...
      04-22-2024, 11:28 AM
    • smic717394
      iphone XS turns off when press on screen.
      by smic717394
      Hi,

      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
      07-25-2024, 10:16 AM
    • AJ847.63e
      A2338 Screen replacement - Clarification needed. What do you actually loose when replacing the screen with OEM Pulls?
      by AJ847.63e
      Hi All,

      Just wanted to get some clarification on replacing screens on M series machines (M1,M2,M3,M1pro,M2pro,M3pro) as there is so much conflicting information out there. Some say even when using OEM pulls you lose True Tone and only that, others say you lose that and webcam, others say you lose those two and also the lid sensor will not work, others say you lose nothing as long as you use OEM pulls.
      So, which one is it actually? Using original OEM pulls. That seems to be what has caused the confusion, people using cheap aftermarket than being surprised when it does not work...
      03-06-2024, 06:44 PM
    • Chrissygizmo
      Samsung UE55JU6800K half screen dark
      by Chrissygizmo
      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
      02-10-2025, 12:33 AM
    • Loading...
    • No more items.
    Working...