Panasonic txp50u20b

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blib
    Senior Member
    • Feb 2012
    • 56
    • UK

    #1

    Panasonic txp50u20b

    Hi all.
    Does any one know the fault area when this TV displays 10 flashes? Is it the same as the older pana plasma power supply fault.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Panasonic txp50u20b

    It's usually the A board.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia

      #3
      Re: Panasonic txp50u20b

      I'd start with isolating the SC & SS board connectors and see if it changes just in case one of those are shorted.
      Attached Files
      Last edited by tw2005; 05-04-2013, 06:25 AM.

      Comment

      • blib
        Senior Member
        • Feb 2012
        • 56
        • UK

        #4
        Re: Panasonic txp50u20b

        Tom. Is that the video board ? Any idea what goes wrong on it?

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: Panasonic txp50u20b

          A Board is the video board yes.
          No I'm not sure, though I have a good feeling it is BGA bondings, like the Xbox 360/PS3 had, as some TVs before showing this failure apparently reported video and audio glitches and it can be intermittent.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          Related Topics

          Collapse

          • Rictech
            Panasonic SA-MAX770PU SMPSU board fault....
            by Rictech
            Hello everyone. πŸ˜€

            As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
            Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

            Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
            This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
            There are no devices that have exploded or otherwise show signs...
            08-26-2024, 01:05 AM
          • chockimon
            Panasonic TX-40AX630B has developed a fault
            by chockimon
            Hello,

            I bought a Panasonic 40" TX-40AX630B TV from Richer Sounds 7 years ago and it has developed a strange fault. If I attempt to press any button on the back of the TV or remote control (access media features etc.) the TV locks up for a few minutes or longer and sometimes goes blank. However, if I turn the TV off and on again and quickly select a channel it will work fine all day long, as long as I don't touch the remote or controls on the back of the TV.

            I've tried changing batteries on the remote, changing plug sockets and doing other things such as a...
            06-02-2022, 12:03 PM
          • fixxy88
            Panasonic 55DX600u second fault - panel brightness pulsing on right side
            by fixxy88
            After getting the backlights up and running a second fault has emerged on this TV. I was going accept defeat and move on but thought I'd have a quick look at it in case it was something simple. The right side of the display exhibits a panel brightness (not backlight brightness) pulse every 2-3 seconds in a stable timing.

            I poked about on the TCON test points and found one voltage that is fluctuating in the same pattern. VGH-ODD (Pin 47 of U10) is sitting at ~-6.5v then goes up to ~28v when the brightness pulses then goes back down to ~-6.5v again in a repeating pattern.
            ...
            03-22-2023, 02:58 AM
          • Andre Gilbert
            Panasonic TC-P55ST50 8 blinks then no blinks
            by Andre Gilbert
            Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
            Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

            TV Model: Panasonic TC-P55ST50
            ...
            11-20-2024, 08:52 PM
          • AquaMan Ua
            Problem with PANASONIC CF53 laptop after changing BIOS settings
            by AquaMan Ua
            Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
            05-17-2025, 09:40 AM
          • Loading...
          • No more items.
          Working...