Hi all it looks like it time for a new lamp again,picture getting dark.I have had this set from new, just over six years and in that time i have changed the lamp twice,at just under £100 a go.I have looked on line and to buy one in the UK the cheapest i can find with the holder is £97 free post,but from the USA £23 plus £29 post,there is also one from Germany for £43 free post but looks like it will take a time to get here.What one should i go for,can any American forum users tell me if the ones on ebay over there are any good or to be avoided Thanks Flocko
-
-
Re: JVC HD-70ZR7J Lamp replacement
I've never bought anything from ebay but i have had good luck with a lamp from Amazon. It actually has lasted longer than the original bulb that came with my Mitsubishi dlp. -
Re: JVC HD-70ZR7J Lamp replacement
Thanks for the reply,the projector lamp for my set over here in the UK is £97 rip off, the same lamp from the US is $34.54 (£23) plus post it is still half the price of the UK one, but are they any good or not,i dont want to buy one for it to only last six months.Comment
-
Re: JVC HD-70ZR7J Lamp replacement
The one i got from amazon has lasted over a year and its still bright. I think i paid around $45 for it. I think the warranty on it was 3 or 6 months.Comment
-
Hi guys,
I post my problem here because I think it could be a capacitor related issue (Asus support on this particular subject is non-existing).
So the computer is a Zephyrus-S17-GX735LXS-26T and the strange behavior is seen.
On cold start most of the time the internal screen is detected and a picture it works fine until shutdown, sleep or deep sleep.
Then the screen won't work for a long period of time.
If I wait 1 or 2 hours it work again most of the time.
When it doesn't work the batterie indicator blink 3 times white stop and the same schematic is repeated... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hoping someone here can put me on the right track. I'm trying to troubleshoot/flowchart the "internal projector error" on my newly acquired Facebook Marketplace bought Epson 5040UB projector (3LED, not DLP). Owner said it needed new lamp, actually error code blink pattern indicates "Internal Projector Error, call Epson support". Unit is out of warranty as of 8/19
Here's what happens:
1) Power on
2) Blue power indicator lights and the lens cover motor opens the lens cover, light fan noise heard
3) Blue status light flashes for appx 4 minutes... -
I have a cheap action camera with an annoying trait, every time I change batteries the date & time gets reset and I have to set it again.
To solve this problem I want to add a small internal battery inside it which will keep supplying power to the camera for a while while I change batteries so the date & time is retained.
I have opened the camera and I think there is enough room to add something inside to accomplish this:
The camera is powered by a 3.7V nominal single cell lithium ion battery.
So I need to connect another battery in... -
Hello guys,
I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.
I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
Comment