sharp aquos LC-32D44U

[serg752]

the problem is that I have no picture and sound. when connecting the TV, there is a relay on the board of the power supply that has 2 click recovery declic this product 4 times, after these tests, the power light and opc blink together once, and after the power light flashes 2 times, repeat this sequence it.
NB when I reset the TV by pressing simultaneously on the volume - and the input
The tv work perfectly. thank you

[tom66]

Re: sharp aquos LC-32D44U

Have you checked the bulb error counter under the service menu?

[serg752]

Re: sharp aquos LC-32D44U

how do we check the counter in the service menu?

[budm]

Re: sharp aquos LC-32D44U

See post 11 by TOM.
https://www.badcaps.net/forum/showth...728#post328728

[serg752]

Re: sharp aquos LC-32D44U

Thank you very much for your advice, I re-initialized the tv
and everything works now

[senndogg]

Re: sharp aquos LC-32D44U

hello!
has anyone (sure has) replaced neon bulbs in those kind of TVs? i mean this generation of lcds. i have a similar one, and i did the C7558 trick, its working but there is a terrible smell, like High Voltage leads of the gone lamp. now i want to replace it. any hard?

[Bilbo44uk]

Re: sharp aquos LC-32D44U

check output inverter capacitors 5pf at 6kv, mine where reading 6pf to 7.2pf