Re: Need help figuring out whats wrong with my LG 50PJ350
Ok,anything else I should consider testing?
Ok,anything else I should consider testing?
-
-
Re: Need help figuring out whats wrong with my LG 50PJ350
I think my multimeter is defective because it always says 1 no matter what im doing....wtf...im going to go get another one shortly.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Probes touched together what do you see?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
It stays on 1 unless i can manage to bring the very tip of one probe to the very tip of the other probe,and then it will flash random numbers between 80-180Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Your meter is faulty then. Replace it.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
That, or your probes are corroded. Try other probes first.A working TV? How boring!Originally posted by PeteS in CAComment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Ok guys thanks for the help,Once i get a new multimeter sometime this week i will let you guys know what happens
Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Ok so I brought the TV to a TV repair shop and they are saying that there is 10 bad resistors on the PSU and that they cant solder on new resistors,they have to replace the whole PSU , for $170.....does this sound like something that would happen with the signs I listed?Is it that hard to solder on new resistors?
thanksComment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Sounds like utter nonsense.
It's not hard at all to replace resistors...
10 bad resistors?? I'd be very surprised if that were the case.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Well needless to say after a bunch of B.S. the repair shop came up with,They said they made a mistake and there was only 2 defaulted resistors( The exact 2 resistors tom mentioned at the beginning of this thread before I even took the TV into repair, Good call tom!) ... I decided I didnt want to do business with them so I told them dont repair it,and they only took $70 instead of $170...
Well I know the parts I need,and that I need to remove the current resistors and solder new ones on.Can anyone give me any guidance on the removing/and soldering of the new parts.First time doing this...if I need to get behind that psu how do i disconnect the cables that prevent you from pulling the panel back very far?Whats the easiest way to remove the current resistors?. here is the pic of the panel and the 2 resistors in question (as posted previously in thread)
thanks
I bought a 60 in. panasonic,so this is going to be my backup tv
Attached FilesLast edited by joyride; 04-27-2013, 04:54 PM.Comment
-
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Here's the part you'll need.
http://www.digikey.com/product-detai...460-ND/2365661
I would not give that TV shop any further business if they lie to customers like that, and seriously, it takes less than 5 minutes to replace those...
Enjoy the Panasonic. Nice choice. This LG is also pretty decent apart from some reliability problems, though more reliable than Samsung... :/Last edited by tom66; 04-27-2013, 05:50 PM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Ok thanks.Any tips for removing the current resistors?Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Soldering iron & fresh solder applied to each end for a few seconds, wiggle the original out slowly, swapping from side to side with the iron (no more fresh solder once the stuff starts to melt well.)Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Ok thanks , and will I be able to do this without dismounting the psu?Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Hi,
I have lg 50pg25. It has similar problem. Power on for about a couple of seconds to a couple of minutes then shut off. Could this be same problem?
It has three white resistors on the top right corner.
Attached FilesComment
-
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Hmmm..you see those sets of insulated wires going into the psu ?How would you discconnect those so you can take the psu off the TV??
When I unscrew all the bolts holding the psu down,the wires are the only thing preventing me from pullling it all the way off.Comment
-
Re: Need help figuring out whats wrong with my LG 50PJ350
Press down firmly on each side of the connector and lift it out. Do not apply excessive force.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Hello everyone.
I have come here with a rather specific question. I was given a Dell Latitude 7420 laptop with a busted screen, and wanted to see if I could refurbish it into my daily driver. I wanted to experiment and see if a 2-in-1 display would work as the chassis of the laptop and 2-in-1 7420 looked identical. I threw in the display and my hypothesis was correct, however, I was greeted with a locked BIOS and since I didn't know the password, I figured I'd try to unlock it somehow. I bought one of those POGO pin probe things for my CH341A programmer so I could read and make... -
Hi everyone,
I hope someone can help me.
I have an Asus ROG Strix Scar 18 (G814JZ) laptop with a Winbond 25Q16JWNIG chip on the motherboard.
Unfortunately, I flashed the wrong file (BIOS/EC/other region – I'm honestly not sure anymore), and now the laptop is completely dead: no display, no fan spin, no reaction at all.
I have a CH341A programmer and I'm able to read and write to the chip. However, I'm not sure which software is best (AsProgrammer, NeoProgrammer, etc.) or if there's anything specific I should watch out for.
A valid BIOS/EC backup... -
Hello,I need help figuring out the resistance of this exploded resistor. I'm pretty sure it's the one labeled R37. I tried measuring it with a multimeter, but I got different values each time, probably because it's exploded. If you have a schematic, it would be really helpful!
Its a gtx 1060 6gb inno3d compact, i you have schematic it would be very helpful.... -
Long story short:
- dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
- gave the computer to his son a couple years later
- son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
- too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
(seems like the story was not that short)
He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8... -
Hello.
I received a 840 G1 with completely wrong system info in BIOS.
Serial Number and everything is wrong, even the Model is wrong (written as 850 G1)
How can i reset these info?
Thank you!
Comment