Lg lg50pg20

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Peale
    Senior Member
    • Apr 2009
    • 96
    #1

    Lg lg50pg20

    I've never touched a plasma set before. This is entirely new territory.

    I was told that "we were watching it, it went "click" and turned off. It makes sound, but no video."

    I checked the fuses inside, and none of them are blown.

    Photos of the boards, forthcoming.
    Tags: None
    • awyatt2
      Badcaps Veteran
      • Feb 2012
      • 407
      • america
      #2
      Re: Lg lg50pg20

      after the pictures, check the power supply for voltages and see what if any are missing. use the chassis of the set for ground and probe the connectors. most have a legend imprinted near the connections to tell voltages. the ve and vsus should be on a label affixed to the back of the panel.

        Comment

        • Peale
          Senior Member
          • Apr 2009
          • 96
          #3
          Re: Lg lg50pg20

          It appears that none of the voltages are missing.

            Comment

            • Peale
              Senior Member
              • Apr 2009
              • 96
              #4
              Re: Lg lg50pg20

              Posting to subscribe to topic.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Thermaltake
                  Panasonic NV-FS200 restoration
                  by Thermaltake
                  Hi,

                  I got this VCR in compensation and well, It wouldn't be fun If I didn't f*** something up doors that won't close completely was easy fix.

                  I was thinking that someone who messed with VCR before me didn't screw all the way this screw(see picture), but later I found out that this screw is suppost to be like that smh... and now after I clean head and everything I got this kind of situation on video (see videos)

                  - on first play I got black and white/color exchange white some noise and picture is flickering

                  https://imgur.com/ygMXcWI
                  ...
                  06-23-2024, 12:13 PM
                • S.gilletly
                  Accidentally touched multi meter lead to multiple pins on power supply.Vizio E400i-B2
                  by S.gilletly
                  I am currently attempting to fix my TV and my sisters TV. I recently took voltages from my sisters E400i-B2 vizio power supply. I accidentally touched multiple pins with my lead on CN201. Pins 7-12v and 8 -12v where both reading between 10-10.8vdc when powered on. since I touched multiple pins at once and caused a quick arc the same pins are now reading 3.7dvc when on and off. I'm lost at this point. Any information would be great. thank you
                  11-16-2017, 09:48 PM
                • jboxer
                  PHILIPS 32PHS5505 side board problem
                  by jboxer
                  hi, im working on a Philips tv that works good, mainboard good, backlight good but the side board that control the lcd panel don't work good, in first time it only worked when I touched the board in a specific point that was very hot, I think it was a short-circuit and when I touched it my hand worked like dissipator, I had found that the source was a resistance so when I eliminate it there wasn't a short-circuit anymore but still without image only color lines when I touch the new resistance wit a metalic thing and it sparks, where can be the problem? lasts image are a close up of the board(ins't...
                  09-02-2023, 02:46 AM
                • majster-pl
                  Can a BIOS chip survive hot-air soldering but still lose functionality?
                  by majster-pl
                  Hello everyone,
                  I’ve run into an issue after working with a laptop BIOS chip and wanted to get some advice.

                  I desoldered the BIOS chip using hot air and then read its contents with a CH341 programmer (only a read, no write or erase was done). The .bin file was not modified at all. After soldering the chip back, the laptop now no longer powers on.

                  For clarity:

                  No surrounding components were touched during the process.

                  All pads were checked with test points and were confirmed OK.

                  My question is:...
                  09-08-2025, 04:21 AM
                • jesi
                  macbook pro a1707 dead
                  by jesi
                  hi all techs

                  require some help on this 820-00281-A macbook motherboard came in dead and the pch bga U1100 (SR2NH), u5000 , Q7056 , U7000 and bios U6100 ,looks like these have been tampered with ..also the battery is swollen..

                  adapter usb c 20.5v 4.7a 96w , i persume it should power on mb without battery..

                  update:

                  when adapter plugged in , power switch which 3.3v on it , when power button pressed both fans come on after 6 secs for about 20secs approx then goes off , nothing on the display stays as blank.. the voltage at the usbc out start from...
                  08-24-2025, 04:34 AM
                • Loading...
                • No more items.
                Working...