Seiki LC-40G81 doesn't turn on

[eltuko]

Can anyone tell me what the part number for Q12 is? Even better
if you have the schematics.

[tom66]

Re: Seiki LC-40G81 doesn't turn on

How about some pictures of the board?

[eltuko]

Re: Seiki LC-40G81 doesn't turn on

How about some pictures of the board?

I don't have a good digital camera, so pictures won't be high quality.

[selldoor]

Re: Seiki LC-40G81 doesn't turn on

Any picture may be better than no picture take it in good light . Seiki does not crop up very often - only 2 or 3 mentions on the whole site so the chances of someone being able to help are minimal.

You dont even tell us which board it is on - the board number may help if it is used in other sets

Is the q12 completelu destroyed - no letters or numbers remain? if it is just burnt a bit can you clean with isopropyl alcohol?

[eltuko]

Re: Seiki LC-40G81 doesn't turn on

Any picture may be better than no picture take it in good light . Seiki does not crop up very often - only 2 or 3 mentions on the whole site so the chances of someone being able to help are minimal.

You dont even tell us which board it is on - the board number may help if it is used in other sets

Is the q12 completelu destroyed - no letters or numbers remain? if it is just burnt a bit can you clean with isopropyl alcohol?

Q12 in on the main board and doesn't look burnt. Board number is 1108H0846. It's fed by 12V and when I turned on the TV it doesn't switch. Q12 feeds the video board. ( I think it's a mosfet) Can't read the markings. I attached a few pictures, hope they may be helpful.