Just found an insignia ns-lcd32

[keico]

ok just found a insignia ns-lcd32 lcd tv that was thrown away.

After plugging in I see the screen is cracked.

Was wondering if anyone has a part number for the screen or can provide me with a link to where I can get one.

[tom66]

Re: Just found an insignia ns-lcd32

It will be written on the back of the LCD panel i.e. LTA32A0P06 for a Samsung 32" LCD panel. However please note in the vast majority of cases it is not economical to replace the LCD panel.

[keico]

Re: Just found an insignia ns-lcd32

Here is what was on the screen

k32w0wf0131111437x06n7lr001166

I can't seem to find anything with this part number

[tom66]

Re: Just found an insignia ns-lcd32

How about a picture of the back of the chassis?

[keico]

Re: Just found an insignia ns-lcd32

How about a picture of the back of the chassis?

I will make sure I put one up today

[keico]

Re: Just found an insignia ns-lcd32

ok i found the part number CLAA320WF01-SC

[tom66]

Re: Just found an insignia ns-lcd32

http://www.ebay.com/itm/DYNEX-LCD-PA...-/170830516833

Probably not worth it to be honest.

[keico]

Re: Just found an insignia ns-lcd32

http://www.ebay.com/itm/DYNEX-LCD-PA...-/170830516833

Probably not worth it to be honest.

I agree seems like this particular Model LCD had a lot of problems.

Do you think I should save the electronic boards and throw out the rest or just throw the who;e thing away????

[tom66]

Re: Just found an insignia ns-lcd32

That is what I would do.
I just picked up a free 32" Polaroid with a cracked screen. If I had just replaced the LCD it would be no good, because the force which cracked the screen also damaged the power supply and main board (bending both.)

[keico]

Re: Just found an insignia ns-lcd32

That is what I would do.
I just picked up a free 32" Polaroid with a cracked screen. If I had just replaced the LCD it would be no good, because the force which cracked the screen also damaged the power supply and main board (bending both.)

I did plug it in and it did come on, I can even see some of the menu, so I do not think the power supply or any other boards are bad .

Question do you think this screen will work in this one

http://www.ebay.com/itm/321051150062...84.m1423.l2649

[tom66]

Re: Just found an insignia ns-lcd32

The screen must be an -EXACT- match to guarantee it will work, because don't forget you also have mechanical mountings.

[keico]

Re: Just found an insignia ns-lcd32

Here are some pics

[keico]

Re: Just found an insignia ns-lcd32

The screen must be an -EXACT- match to guarantee it will work, because don't forget you also have mechanical mountings.

I don't mean to keep bugging you but the one I posted from ebay says it will fit the same model I have

[tom66]

Re: Just found an insignia ns-lcd32

OK, so it may work. The LCD panel model is also important because the main board will be programmed for the right panel. Also try the main board with a video signal to see if you get a picture, just in case main board has other issues.

[Mr Bill]

Re: Just found an insignia ns-lcd32

I think the ebay link you've posted won't work. The ebay link Tom posted in post #7 is an exact replacement for the panel you need. Your current broken panel is a chunghwa panel. The ebay link you posted is a Chi mei innolux panel. So the chances are very slim that it'll work right out of the box. Shop Jimmy is showing 29 different panels for you tv and 17 mainboards if i'm counting correctly. SO the ebay auction you posted is correct saying it'll work for your tv but like Tom has already said if the mainboard isn't compatible with the panel your probably going to be buying a paper weight.

I have a CLAA320WA01 panel in my basement but you need a CLAA320WF01 panel. I looked at the datasheets and your panel and mine are pinned completely different. Though you MIGHT be able to cut the LVDS cable and reroute the wires but its a job in itself.

[keico]

Re: Just found an insignia ns-lcd32

I really appreciate the advice I am getting.

I did send the guy message about the panel, because I see that I have 7 connections on one side and on his it might be 8, I think if it is 7 then it just might work.

I still am not sure if I will invest or not, just weighing my options right now

[budm]

Re: Just found an insignia ns-lcd32

Best way to verify is to download the specification of the panel and look at the pin out of the T-CON and the voltage it needs.

[Paul678]

Re: Just found an insignia ns-lcd32

I don't mean to keep bugging you but the one I posted from ebay says it will fit the same model I have

Keico, I have a good panel from this same model.

It might work for you. Contact me in a personal message.