lg 60 pc1d recycles clicking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #81
    Re: lg 60 pc1d recycles clicking

    431 will be most likely on larger board.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • tocold4u2
      Badcaps Veteran
      • Dec 2012
      • 284
      • usa

      #82
      Re: lg 60 pc1d recycles clicking

      that was with it turned all the way ,,i couldn' t turn it any more,,i will c if i can find that part .

      Comment

      • tocold4u2
        Badcaps Veteran
        • Dec 2012
        • 284
        • usa

        #83
        Re: lg 60 pc1d recycles clicking

        i found of 2 of those parts (431) ony ideal howmany there is on this board? i think tomorrow i will invest in a magifying glass....lol

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #84
          Re: lg 60 pc1d recycles clicking

          One for each main supply, so I'd say at least three, probably four or five.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • tocold4u2
            Badcaps Veteran
            • Dec 2012
            • 284
            • usa

            #85
            Re: lg 60 pc1d recycles clicking

            ok let me c if i can find the others ,,,,,,

            Comment

            • tocold4u2
              Badcaps Veteran
              • Dec 2012
              • 284
              • usa

              #86
              Re: lg 60 pc1d recycles clicking

              i found 3 with that number there was 2 other ones but they had a diff number ??

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #87
                Re: lg 60 pc1d recycles clicking

                What was this different number?
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • tocold4u2
                  Badcaps Veteran
                  • Dec 2012
                  • 284
                  • usa

                  #88
                  Re: lg 60 pc1d recycles clicking

                  looks like it is k650 ??

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #89
                    Re: lg 60 pc1d recycles clicking

                    OK, so it's a transistor -- not something we need to worry about at the moment...
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • tocold4u2
                      Badcaps Veteran
                      • Dec 2012
                      • 284
                      • usa

                      #90
                      Re: lg 60 pc1d recycles clicking

                      their hard to read cause their right behind the two big caps top left

                      Comment

                      • tocold4u2
                        Badcaps Veteran
                        • Dec 2012
                        • 284
                        • usa

                        #91
                        Re: lg 60 pc1d recycles clicking

                        can these be tested on the board or do i have to take them off the board to test them? and what would they test good at ?

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #92
                          Re: lg 60 pc1d recycles clicking

                          I don't think we need to test them right now.
                          But if you insist: http://www.elexp.com/t_test.htm
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • tocold4u2
                            Badcaps Veteran
                            • Dec 2012
                            • 284
                            • usa

                            #93
                            Re: lg 60 pc1d recycles clicking

                            when the previous owner put the resistor on the bottom side of the board ,,,,,y i dont know , what if the resister was backwards , or would that matter what way they go. ? also sense it looks like that there was a burnt spot under it , i m going to check the other parts around that . i'm thinking it shorted something right in that area,,,just a hunch.

                            Comment

                            • ben7
                              Capaholic
                              • Jan 2011
                              • 4059
                              • USA

                              #94
                              Re: lg 60 pc1d recycles clicking

                              Originally posted by tocold4u2
                              when the previous owner put the resistor on the bottom side of the board ,,,,,y i dont know , what if the resister was backwards , or would that matter what way they go. ? also sense it looks like that there was a burnt spot under it , i m going to check the other parts around that . i'm thinking it shorted something right in that area,,,just a hunch.
                              Perhaps the old resistor burnt out, and it was replaced with a higher wattage one, which was mounted on the back of the board? No, resistors can be put in either direction, they don't have a polarity.
                              Muh-soggy-knee

                              Comment

                              • tocold4u2
                                Badcaps Veteran
                                • Dec 2012
                                • 284
                                • usa

                                #95
                                Re: lg 60 pc1d recycles clicking

                                the resister had a chip in it and the under side of the board where it was has a burnt spot . all the pictures that i have seen of this board has the resiston on the top side of the board. i tested it with (ohms) on meter and didnt get a reading or a beep. i think it was like 1.50 ohm resister , i will have to check again.

                                Comment

                                • tocold4u2
                                  Badcaps Veteran
                                  • Dec 2012
                                  • 284
                                  • usa

                                  #96
                                  Re: lg 60 pc1d recycles clicking

                                  i was looking at my power board scratching my head and i noticed a buldge on
                                  Attached Files

                                  Comment

                                  • tom66
                                    EVs Rule
                                    • Apr 2011
                                    • 32560
                                    • UK

                                    #97
                                    Re: lg 60 pc1d recycles clicking

                                    Yeah, if that's for Va, it could easily cause low Va.
                                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                    Comment

                                    • tocold4u2
                                      Badcaps Veteran
                                      • Dec 2012
                                      • 284
                                      • usa

                                      #98
                                      Re: lg 60 pc1d recycles clicking

                                      let me see if i can get another picture
                                      Attached Files

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK

                                        #99
                                        Re: lg 60 pc1d recycles clicking

                                        It's quite possibly the fault at hand -- try replacing it.
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                        Comment

                                        • tocold4u2
                                          Badcaps Veteran
                                          • Dec 2012
                                          • 284
                                          • usa

                                          #100
                                          Re: lg 60 pc1d recycles clicking

                                          well thats great atleast its a start lol kind of
                                          560 j 1600v pilkor 334mmkp wk0705 i believe those are the correct numbers on it.

                                          Comment

                                          Related Topics

                                          Collapse

                                          • beetle1303
                                            Carver CM-1090 - Power relay clicking on & off, then fuse blown after 20-30 seconds of power cycling.
                                            by beetle1303
                                            I gotten a Carver CM-1090 amplifier from a friend who has kept it in storage for decades. Opened it up, thick layer of dust cumulated everywhere. Vacuumed it semi-cleaned, and blown off as much as possible the remaining dust. This is a 220V version.

                                            On initial powered up with nothing connected - it works with all the lights and button indicator lit up as pressed, etc. I then powered off, connected a CD player into the CD RCA input and powered it on. It seemed to work for a short while and when I turned the volume up and down to see the the VUs works, the power started to clicked off...
                                            01-13-2025, 08:49 PM
                                          • corrize
                                            A funny fuse story – Lumix LX100 II
                                            by corrize
                                            Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
                                            I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
                                            The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
                                            There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
                                            And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
                                            10-19-2023, 09:58 AM
                                          • jesterace
                                            Samsung UE46ES8000 Blown fuse but no other signs of short
                                            by jesterace
                                            Hi I wonder if anyone might be able to steer me in the right direction. I have this Samsung UE46ES8000 TV and it went bang during use. The main fuse on the PSU board is open. I've checked every diode/mosfet/transistor I can see and nothing appears to be short to cause the fuse to go. The DC output of the bridge rectifier is not short either. I've seen online that some of these models are known for having their PFC mosfet or other mosfets shorting and blowing the fuse but i'm not seeing that here. If anyone aware of these models having any issues to cause this? I'm reluctant to just replace the...
                                            09-11-2024, 03:14 PM
                                          • jshhh
                                            Help replacing fuse on my Mimaki CJV300-160 vinyl printer
                                            by jshhh
                                            Hi guys,

                                            I'm inexperienced with electronics repairs, I've done a little bit of soldering caps and whatnot, but i have a blown fuse on this mimaki printer I got which I have bought a replacement for.

                                            How do I remove this type of fuse (see picture)...it kinda looks like it would pull out of that bracket but it didn't come at first pull and I didn't want to brute force it incase it's soldered on there like most of the rest of the components.

                                            Anybody know how to remove this type of fuse?

                                            (The fuse is toward the bottom of the image labeled F2)...
                                            06-17-2025, 01:35 AM
                                          • Babbar
                                            Argon SA1 audio amplifier power-supply - fuse blown after fixing the short?
                                            by Babbar
                                            I found a project in the electronics trash yesterday. A nice Argon SA1 audio amp with some electrical issue. Took it apart and saw that the 4A250V fuse was blown so started lifting components to find the short. Eventually got to two MOSFETs (model FTA14N50C) that are shorted and when i took them out the short was gone.

                                            Now i didn't have any replacements of the same model of course but i found a couple with pretty similar spec i thought (K10A60D & K12A50D) and put them in. Also replaced the blown fuse with a 3.5A250V one. Checked another time for short circuit and plugged it in....
                                            04-12-2024, 01:12 AM
                                          • Loading...
                                          • No more items.
                                          Working...