sanyo no back ligth

[ealequi]

Re: sanyo no back ligth

Service manual:


I did not have a chance to look at it yet.

this address is not good. it frezze your computer

[tom66]

Re: sanyo no back ligth

Works fine for me. What browser do you use?

[ealequi]

Re: sanyo no back ligth

Works fine for me. What browser do you use?

explorer

[tom66]

Re: sanyo no back ligth

Try Firefox or Chrome; IE doesn't work well with elektrotanya.

[ealequi]

Re: sanyo no back ligth

By the way, Can I get the picture of this connector so I can clearly see the label on the pins? Right now the wires are blocking out the labels.

ok. sorry i was busy today

[ealequi]

Re: sanyo no back ligth

[ATTACH]54337[/ATTACH]

[ATTACH]54338[/ATTACH]

[ATTACH]54339[/ATTACH]

[ATTACH]54340[/ATTACH]

[ATTACH]54341[/ATTACH]

[ATTACH]54342[/ATTACH]

[ATTACH]54343[/ATTACH]

[ATTACH]54344[/ATTACH]

[ATTACH]54345[/ATTACH]

[ealequi]

Re: sanyo no back ligth

ok. sorry i was busy today

i send the pic. you asked, pls help me. thanks.

[ealequi]

Re: sanyo no back ligth

can anyone help me with my sanyo dp42849

[MisterD]

Re: sanyo no back ligth

Can you please move your camera around to the other side of this connector, you may have to unplug the connector so we can see the voltages printed on the board, the wires are in the way. please look at the area where the red circle is drawn around it. that's what budm is asking to see up close without the wires in the way. Thanks.

Please Go to Post 39 and look at the picture there, you will see the red circle around it, I don't know why my re-post of this picture is not working.

[ealequi]

Re: sanyo no back ligth

[ATTACH]54360[/ATTACH]

[ealequi]

Re: sanyo no back ligth

is this pic. good?

[MisterD]

Re: sanyo no back ligth

It's blurry but is what we need to see, can you try again to get a clearer picture of it. Thanks.

Looks like going from left to right.. GND, STB5V, 12V and Line Off

[ealequi]

Re: sanyo no back ligth

yes

[ealequi]

Re: sanyo no back ligth

[ATTACH]54366[/ATTACH]

[ealequi]

Re: sanyo no back ligth

is this one good?

[MisterD]

Re: sanyo no back ligth

is this one good?

Yes, very good. thank you. hopefully budm will be back on here to help you.

[ealequi]

Re: sanyo no back ligth

i be here.thanks

[MisterD]

Re: sanyo no back ligth

i be here.thanks

I think there's a good possibility that your Main Board is bad and not sending the correct signal to the power supply to turn on the Backlights since that voltage is too low on BL_ON only 1.3V and should be closer to 3v, but please wait for more replies to see what others think.

[selldoor]

Re: sanyo no back ligth

When you were taking the measurements did you have everything connected and
a source - generally recommend a dvd then you can tell it is playing by the sound.
Even though you cant see the picture can you see the on screen menu?

[ealequi]

Re: sanyo no back ligth

ok. i wait