Re: Panasonic P50G20E
Yes
Yes
-
-
Re: Panasonic P50G20E
Perhaps then we need a V20 service manual, then, to see where fan line goes so we can disable it. I'll ask around.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Thank you Tom
Comment
-
Re: Panasonic P50G20E
Comment
-
Re: Panasonic P50G20E
OK, I am now lost. How did you do that? What sorcery is this?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
it's magic TOM
after turning on the TV there is a pause of 10 seconds before turning off.
pressed minus the volume and menu from R.C and showed this
Comment
-
Re: Panasonic P50G20E
So does it work at all, as I do see a self check failed?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
It makes diagnosis and then turns offComment
-
Re: Panasonic P50G20E
I think 2nd FE / 3rd FE might be a fan error.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Тоm with this board I can get into the system menu for 10-20 sek ,from there that can be said whether to have or not fansComment
-
Re: Panasonic P50G20E
In which case, tell it to not have fans then...Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
do not give me change it
Comment
-
Re: Panasonic P50G20E
Does it let you set it, perhaps, for G20 chassis?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
No.
I have no time to consider all,TV turns off very quicklyLast edited by Stanislav; 02-02-2013, 02:34 PM.Comment
-
Re: Panasonic P50G20E
Can you show me what options are available?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
not enough time,the left is the main menu and from there are submenus
Comment
-
Re: Panasonic P50G20E
Tom my friend you will not believe what I found see photo
http://www.hifi-forum.de/bild/panaso...20e_14329.htmlLast edited by Stanislav; 02-02-2013, 03:11 PM.Comment
-
Re: Panasonic P50G20E
A V20E with fans? So they DO exist. Very odd! Is it me, or do the fans go to the SS board?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
No, they go to the A board
Last edited by Stanislav; 02-02-2013, 03:25 PM.Comment
-
Re: Panasonic P50G20E
What's under OPTION in service menu?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was... -
Hi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several... -
My old plasma died when one night recently. When I got to it it was giving a 3.3v sos (3 blinks).
I chased my way through the PSU, and a board, with no results.
Replacing a few bulged caps in the PSU, I eventually got to the SC board that had piles of shorts, a quick cheap replacement from china and the tv powers up again, except
I only have the right half of the picture.
Left half is completely blank.
now the c3 board running this side of the screen has its 3.3 and 5v onto the buffer ic and its got the 60v, so that all seems good.
all the other voltage rails...09-24-2024, 04:39 AM
Comment