Re: Samsung LNT3242H 32" LCD TV, no picture but audio works- no component damage
Hi all, i am new here and let me say i like how you operate,i admire your patience in trying to help everyone.
I have the exact same problem and same model, i have followed suggested procedure up to this point. i have disconnected the inverter board from the lamps and connected an external lamp to the output of each transformer,
when the tv turns on the lamp light up for a couple of seconds but the way it lights is not normal,it is bright for the first 10" then totally dark as if not lit,and the last 3" lit again.i am wondering is it possible the output voltage of the transformer is too low? also is there any way to force the inverter to stay on?
Originally posted by budm
View Post
I have the exact same problem and same model, i have followed suggested procedure up to this point. i have disconnected the inverter board from the lamps and connected an external lamp to the output of each transformer,
when the tv turns on the lamp light up for a couple of seconds but the way it lights is not normal,it is bright for the first 10" then totally dark as if not lit,and the last 3" lit again.i am wondering is it possible the output voltage of the transformer is too low? also is there any way to force the inverter to stay on?
Comment