I have a 50 Samsung plasma monitor that has no picture. The power light flashes a slow blinking green light then goes solid green when powering on. I took the back off of the TV and found 2 bad capacitors on the Y - sustain board. I replaced the bad capacitors with new ones that were the same specs. I powered the set back up, green light stays solid green, and still have the same issue. I double checked all the boards just to make sure I didn't miss a bad capacitor and found nothing. All fuses were good too. I did notice that there is a little LED on the Y-sustain board glowing solid green, so I'm assuming that the board is good and there is something else wrong in the TV? Any suggestions would be great!
Thanks,
Steve
Thanks,
Steve