got a couple possible lightning struck tvs,sanyo DP26670 and insignia NS LTDVD26-o9,neither have main voltage to big cap 60 volts ac instead of 120ac,replaced 2 EMI suppression capacitors and bridge rectifier and main board on sanyo with no luck same blinking red light,insignia light is steady blue any ideas ?
Announcement
Collapse
No announcement yet.
possibly lightning struck ?
Collapse
X
-
Re: possibly lightning struck ?
You are measuring main voltage incorrectly, you should measure with your meter on DC volts. Lightning damage can't cause that kind of failure.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
-
Re: possibly lightning struck ?
OK, on the AC primary side, the negative leg of the large DC filter cap (the one with 250 or 450Vdc rating) is the circuit ground of the primary side.
The cold side (secondary side), the chassis is the circuit ground for the secondary circuit.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
Comment