Bush LCD32TV07HD no picture

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • kevinm34232
    Badcaps Legend
    • May 2012
    • 1884
    • USA
    #21
    Re: Bush LCD32TV07HD no picture

    Thats about as cheap as you can get them. You should be fine after replacing them, and may as well do both at that price. As for why they fail maybe someone else can say..

      Comment

      • madmatt
        Member
        • Sep 2012
        • 25
        • UK
        #22
        Re: Bush LCD32TV07HD no picture

        Ok many thanks, will look at getting the pair
        Matt

          Comment

          • madmatt
            Member
            • Sep 2012
            • 25
            • UK
            #23
            Re: Bush LCD32TV07HD no picture

            The inverters arrived yesterday, fitted today and hey presto ! All good. Another one fixed.
            Many thanks to all the help with this, looking forward to another one now !
            Thanks again guys,
            Matt

              Comment

              Previous 1 2 template Next

              Related Topics

              Collapse
              • Tr0ll
                T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                by Tr0ll
                Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                Original T-con:
                Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                First replacement T-con:

                I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                10-07-2023, 07:48 PM
              • JJAAMM
                SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                by JJAAMM
                This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                Problem
                TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                07-06-2023, 06:01 AM
              • TR103
                Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                by TR103
                Hi, I have a Samsung UE50TU with:
                - sound and backlight, but no picture
                - when it arrived, it had a picture for a few seconds
                - it keeps rebooting
                - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                - without cable between mainboard and lcd panel and with a jumpered...
                01-22-2025, 04:12 PM
              • Mgiffune
                Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                by Mgiffune
                I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                I ordered a supposedly ‘new' Tcon board this time, and                ...
                06-09-2024, 10:28 AM
              • x_orange90_x
                Vizio E55-E1 bad backlights or bad inverter?
                by x_orange90_x
                I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

                I don't know how exactly to test the inverter itself. Is it...
                01-29-2025, 09:24 PM
              • Loading...
              • No more items.
              Working...