LG M2262D TV is not turning on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tibimakai
    Badcaps Legend
    • Jan 2012
    • 3680
    • USA

    #41
    Re: LG M2262D TV is not turning on

    Here is a video with the problem.
    Panel gutted to be able to see the tubes.
    PS is powered through a resistor from the 5.2V to ON pin.
    https://www.dropbox.com/s/k3s4zj50zn...320_161355.mp4
    Last edited by tibimakai; 03-20-2013, 07:31 PM.

    Comment

    • tibimakai
      Badcaps Legend
      • Jan 2012
      • 3680
      • USA

      #42
      Re: LG M2262D TV is not turning on

      I have just purchased a new PS from the bay for $25 and now it's working properly, no more blinking.

      Comment

      • tibimakai
        Badcaps Legend
        • Jan 2012
        • 3680
        • USA

        #43
        Re: LG M2262D TV is not turning on

        I have installed the new power supply and the TV works, but it makes a buzzing sound.
        It makes the buzzing sound when there is no signal, or dark images.
        As I increase the backlight setting, the buzzing goes away.
        What this could be?

        Comment

        • tibimakai
          Badcaps Legend
          • Jan 2012
          • 3680
          • USA

          #44
          Re: LG M2262D TV is not turning on

          No ideas?
          The seller offered to send a new board, but I would like to be sure that the PS is at fault and not something else, like tubes, or who knows what else.
          I have just received a CCFL tester and I will double check the tubes to be sure that they are working all four of them properly.

          Comment

          • supracomp
            New Member
            • Jun 2013
            • 2
            • hrvatska

            #45
            Re: LG M2262D TV is not turning on

            Can somebody read value of R111 resistor, near trafo on powerboard. Thank you

            Comment

            • tibimakai
              Badcaps Legend
              • Jan 2012
              • 3680
              • USA

              #46
              Re: LG M2262D TV is not turning on

              I will look at the board when I get home.

              Comment

              • tibimakai
                Badcaps Legend
                • Jan 2012
                • 3680
                • USA

                #47
                Re: LG M2262D TV is not turning on

                The board that I have is the broken one.
                That resistor doesn't have the regular color rings. It's a green resistor with a couple of logos and the only marking that makes sens is 2A. I have measured it out of the circuit and shows 0 OHM. Maybe it's a fusible resistor of a very small value. On the auto scale shows between 0.03-0.05.
                It looks like this:
                http://www.ebay.com/itm/5x-2A-2M-M-R...957#vi-content
                Last edited by tibimakai; 06-05-2013, 09:56 PM.

                Comment

                • supracomp
                  New Member
                  • Jun 2013
                  • 2
                  • hrvatska

                  #48
                  Re: LG M2262D TV is not turning on

                  Thank you. I put a piece of wire instead it, now it is working.

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA

                    #49
                    Re: LG M2262D TV is not turning on

                    That is 2Amp PICO fuse.
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    • Dumah Brazorf
                      Senior Member
                      • Jun 2013
                      • 179
                      • Italy

                      #50
                      Re: LG M2262D TV is not turning on

                      Fixed one that suddenly shutted off with no sign of life.
                      Replaced the ic strw6252, the picofuse (oddily placed on the hot side) and the schottky rectifier mbr10150 that failed at one of the two sides.

                      Comment

                      Related Topics

                      Collapse

                      • x_orange90_x
                        Vizio E55-E1 bad backlights or bad inverter?
                        by x_orange90_x
                        I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

                        I don't know how exactly to test the inverter itself. Is it...
                        01-29-2025, 09:24 PM
                      • Gentian
                        APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger schematic
                        by Gentian
                        I have a tripp-lite aspint 3636vr inverter charger which blow some of mosfet transistors. I replaced them repaired also the driver circuit and tested but the mosfets burn again.

                        It work very well as inverter and also as charger if I let the rear switch in auto mode (inverter) and charger only(charging) but in auto when I connect the feed line 220V AC first time it pass ok to line and start charging the batteries but when I remove the feed line it pass to inverter mode and if I do it again the second time when passing from charging to inverter the Main transformer start making a...
                        03-06-2023, 07:07 AM
                      • valvashon
                        Insignia NS-LCD19-09 (PS OK, Inverter problem?)
                        by valvashon
                        For some reason I'm just not going to let this 19" TV defeat me. I guess because I have a schematic to work from I feel like I'm oh so close.

                        History- while adding a turn-on circuit I let a small screw roll under the power board. Worked through all of that circuitry, probably replacing a MOSFET and PWM controller that were not bad but I was following the service manual. Finally figured out that the power supply is in working order when the inverter section (for the backlights) is disconnected. When the +12 supply to the inverter is disconnected the +12 and +5 will come up...
                        01-04-2024, 01:44 PM
                      • eccerr0r
                        A modified sine wave inverter + a grid tie inverter?
                        by eccerr0r
                        If I had a solar fed grid tie inverter (GTI), a modified sine wave inverter, and a power outage occurred, what would happen if you disconnected mains, backfed the modified sinewave inverter (MSI) into house power, and hooked up the GTI to the output of the MSI, would it work?

                        Next thing is trying to charge the batteries using solar power, but that's another issue ...
                        08-31-2023, 09:14 PM
                      • caseyjay_48
                        Sony KDL-46BX450 Inverter Troubleshoot Logic
                        by caseyjay_48
                        I am currently on a troubleshoot of 46” Sony KDL-46BX450 tv. I came back from Washington to Texas on medical emergency and had to leave all my tools up there. All I have is a couple of screwdrivers and a dvm. I wish to ask the community a troubleshooting question. Please forgive stupid questions as meds I am taking produce brain fog.
                        I have well maintained Sony KDL-46BX450. It went black one day. After turn-on, I get solid green light and Sony logo in screen center for about 1-2 seconds, then black. No blinking LEDs, no hissing. Flashlight test shows screen characters dimly viewable,...
                        09-23-2022, 08:08 PM
                      • Loading...
                      • No more items.
                      Working...