L26ta6a wharfedale lines on screen on warm up fixed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shepp
    Badcaps Veteran
    • Mar 2012
    • 377
    • England

    #1

    L26ta6a wharfedale lines on screen on warm up fixed

    tv was taking about 10-15mins for the picture to appear there were just lines going horizontally across the screen, thought it was a bad solder joint or tcon cable, so ordered new cable...no differance, ordered tcon and fitted no differance, sent tcon back and swopped for a main board.....still no change! but there was some dodgy noises coming from 105J cap on PSU so decided to swop it and see if that sorted it, and low and behold....BINGO!

    MORAL OF THE STORY.......IF THERES NOISES COMING FROM A COMPONENT THAT SHOULDN'T MAKE NOISES SWOP IT FIRST THEN RETEST BEFORE ORDERING BOARDS ON A WHIM


    SORRY NO PICS BUT THERES ONLY ONE 105J RED CAP ON THE POWER SUPPLY AND ITS ON THE LEFT HAND SIDE OF THE BOARD

    HOPE THIS HELPS SOMEONE IN THE FUTURE
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: L26ta6a wharfedale lines on screen on warm up fixed

    Surely this would have caused low supply voltages, causing the issue?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • shepp
      Badcaps Veteran
      • Mar 2012
      • 377
      • England

      #3
      Re: L26ta6a wharfedale lines on screen on warm up fixed

      Well last night I got a call saying it's doing it again now, so maybe it wasn't that, I will be getting the tv back Thursday to investigate the problem, must be the power board cold joint maybe

      Comment

      • shepp
        Badcaps Veteran
        • Mar 2012
        • 377
        • England

        #4
        Re: L26ta6a wharfedale lines on screen on warm up fixed

        Originally posted by shepp
        tv was taking about 10-15mins for the picture to appear there were just lines going horizontally across the screen, thought it was a bad solder joint or tcon cable, so ordered new cable...no differance, ordered tcon and fitted no differance, sent tcon back and swopped for a main board.....still no change! but there was some dodgy noises coming from 105J cap on PSU so decided to swop it and see if that sorted it, and low and behold....BINGO!

        MORAL OF THE STORY.......IF THERES NOISES COMING FROM A COMPONENT THAT SHOULDN'T MAKE NOISES SWOP IT FIRST THEN RETEST BEFORE ORDERING BOARDS ON A WHIM


        SORRY NO PICS BUT THERES ONLY ONE 105J RED CAP ON THE POWER SUPPLY AND ITS ON THE LEFT HAND SIDE OF THE BOARD

        HOPE THIS HELPS SOMEONE IN THE FUTURE
        so much for that!! i will post some pics as well when i get the tv back

        Comment

        • shepp
          Badcaps Veteran
          • Mar 2012
          • 377
          • England

          #5
          Re: L26ta6a wharfedale lines on screen on warm up fixed

          well had another look at it.....when i twist the panel it comes on, so im guessing its the tab bonds, all voltages are normal and ive changed the tcon and the cable and the main board with no differance, all ive done is padded the screen where the tabs are, so fingers crossed its cured it, ive tested it a few times cold now and the screen has come on straight away both times

          just hope when the guy gets its back its gonna be ok

          Comment

          • shepp
            Badcaps Veteran
            • Mar 2012
            • 377
            • England

            #6
            Re: L26ta6a wharfedale lines on screen on warm up fixed

            still no joy....just got the tv back.....ended up giving him a 32" that i fixed,

            so back to square 1 now.... im guessing there is something going on with the PSU though, because ive tried swopping all the other boards the only 1 i havent done is the PSU



            gonna take some pics then upload

            Comment

            • shepp
              Badcaps Veteran
              • Mar 2012
              • 377
              • England

              #7
              Re: L26ta6a wharfedale lines on screen on warm up fixed

              piccy's

              any ideas would be greatly appreciated

              ive already.....swopped t-con, t-con cable and swopped main board and the fault is still there
              Attached Files

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: L26ta6a wharfedale lines on screen on warm up fixed

                Fault must be with panel then. If it is a Chi-Mei I have seen two similar faults on 26" LCDs.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • pjfrith
                  New Member
                  • Mar 2014
                  • 1
                  • United Kingdom

                  #9
                  Re: L26ta6a wharfedale lines on screen on warm up fixed

                  Hi Guys, I realise it's been quite a while since the original post, but I'm hoping someone can help.

                  I've just been given a Wharfedale L26TA6A.

                  The person that gave it me said it has the following faults.

                  When switching it on it takes a long time to come on.

                  Sometimes after it's been on a while, the picture becomes (in their words) pixelated.

                  I've just plugged it in and switched it on and, on switching it on, after a few seconds the backlight comes on but the screen remains blank (grey/black)

                  If anyone has any clues where to look first, or if it's worth repairing I'd be grateful.

                  Also, if anyone has the user or service manuals for it, could they send them through to me?

                  Thanks in advance for your help.

                  Pete

                  Comment

                  • shepp
                    Badcaps Veteran
                    • Mar 2012
                    • 377
                    • England

                    #10
                    Re: L26ta6a wharfedale lines on screen on warm up fixed

                    Originally posted by pjfrith
                    Hi Guys, I realise it's been quite a while since the original post, but I'm hoping someone can help.

                    I've just been given a Wharfedale L26TA6A.

                    The person that gave it me said it has the following faults.

                    When switching it on it takes a long time to come on.

                    Sometimes after it's been on a while, the picture becomes (in their words) pixelated.

                    I've just plugged it in and switched it on and, on switching it on, after a few seconds the backlight comes on but the screen remains blank (grey/black)

                    If anyone has any clues where to look first, or if it's worth repairing I'd be grateful.

                    Also, if anyone has the user or service manuals for it, could they send them through to me?

                    Thanks in advance for your help.

                    Pete
                    go straight in and have a look at the power board caps, sounds likely, check voltages and post some pics and report back
                    Last edited by shepp; 03-28-2014, 03:21 PM.

                    Comment

                    Related Topics

                    Collapse

                    • Stanley1843
                      Screen Display Vertical Multicolor Lines
                      by Stanley1843
                      Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                      06-29-2024, 11:54 AM
                    • jeyoung12
                      Samsung QN50Q60t lines on screen
                      by jeyoung12
                      Hi all
                      I have lines on the screen...which is an age old problem that can be remedied by watching Youtube videos and getting out the tape.
                      My issue (after successfully fixing a different sammy tv with a separate tcon board and isolating the side of the panel...):

                      This tv has an integrated tcon...so it is a bit more confusing when trying to isolate the clocks.
                      It has a c ribbon and i have taken each end out to see if that will isolate the lines. instead, it makes it much worse ALL over the tv!

                      So....i don't know what end of the C ribbon to work with...
                      02-26-2024, 10:38 AM
                    • S14Sr20det
                      Nec E557Q lines and fade to black picture FIXED
                      by S14Sr20det
                      Trash picked this tv from a local business, had a garbage image and would fade to black within second then cut off. It would get shorter and shorter every time.

                      Narrowed it down to the right side of the panel by unplugging half the t con
                      One side had a great picture the other was black and distorted still.

                      Down to the buffer boards… found yet another set of two esd diode arrays. One leg had a 60 ohm short to ground and would get lower the more attempts made to turn the tv on.

                      Soldering iron and some chip quick knocked both of them off and...
                      06-17-2023, 02:55 PM
                    • Rubenlily
                      Samsung QE50Q67TAU - horizontal lines
                      by Rubenlily
                      Hello,

                      First of all I'm new here. While looking I found this amazing forum and I'm very happy I did. Now for my problem:

                      I picked up a Samsung UHD QLED QE50Q67TAU from 2021 for $50 knowing it was defective. The seller said it had black lines and that it could get stuck in boot randomly.

                      I've tried a new power cable, hard reset, opening up and jiggling all cables, pressing everywhere to see if I get a reaction but I've gotten nothing. I've tried the tape method but I've only managed to get the lines worse.

                      I'm no expert but I've done the tape...
                      08-16-2023, 01:12 PM
                    • ggil44
                      Sony XBR-65X750D Horizontal lines bottom of screen
                      by ggil44
                      Hi, I have a Sony XBR-65X750D that has horizontal lines at the bottom 6 inches of the screen. These lines appear to be every other line because the picture is still quite visible behind those lines. The lines appear all the time with a few other lines above and below the 6 inch level blinking on and off at about 2 second intervals. I'm not sure if this is a panel issue or power supply/main board problem. I did replace the T-Con board without any change in the problem. Any suggestions you might have would be greatly appreciated. Thanks,
                      05-30-2023, 07:51 PM
                    • Loading...
                    • No more items.
                    Working...