LG 50PC3D shuts off... bad caps?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • akk944
    Senior Member
    • Aug 2012
    • 60
    • USA

    #41
    Re: LG 50PC3D shuts off... bad caps?

    Oh okay let me see if I can get some air blowing in there. Let's see if that's the problem. If it's not how can I know it's the power board or the main board?

    Comment

    • akk944
      Senior Member
      • Aug 2012
      • 60
      • USA

      #42
      Re: LG 50PC3D shuts off... bad caps?

      Tried blowing air around, but didn't make a difference. Where exactly should I be aiming the air, I can take a picture of the TV if that helps. Also, are you guys sure that it can't be that capacitor I first took a picture of? Let me know. Thanks!

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #43
        Re: LG 50PC3D shuts off... bad caps?

        Originally posted by akk944
        Tried blowing air around, but didn't make a difference. Where exactly should I be aiming the air, I can take a picture of the TV if that helps. Also, are you guys sure that it can't be that capacitor I first took a picture of? Let me know. Thanks!
        I'm pretty sure it's not the caps - Samwhas almost always bulge when bad - could still be worth replacing all the caps once it's fixed, because I pulled about 8 Samwha's from the smaller brother of this TV, the 42PC1D.

        The air - needs to go under the main PCB (where video inputs are) - should see a small board - but a malfunctioning temperature sensor might not report good temperatures anyway - from what I remember there is a 4-bit temperature indicator on the control board and it's not supposed to show all LEDs lit only 3/4.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • akk944
          Senior Member
          • Aug 2012
          • 60
          • USA

          #44
          Re: LG 50PC3D shuts off... bad caps?

          just tried blowing air under there from both sides, still no joy =[

          where's that LED you're talking about?
          Last edited by akk944; 08-11-2012, 04:59 PM.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #45
            Re: LG 50PC3D shuts off... bad caps?

            Originally posted by akk944
            just tried blowing air under there from both sides, still no joy =[

            where's that LED you're talking about?
            On the PDP logic board. :/
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • akk944
              Senior Member
              • Aug 2012
              • 60
              • USA

              #46
              Re: LG 50PC3D shuts off... bad caps?

              err I think i see a spot where there are 4 LEDs. Only one lights up and it's green. There's another LED right near it which starts sorta flashing before the TV goes out. Am I looking at the right thing?

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #47
                Re: LG 50PC3D shuts off... bad caps?

                Possibly - can't be sure as only looked at 42" version, it may be different.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • akk944
                  Senior Member
                  • Aug 2012
                  • 60
                  • USA

                  #48
                  Re: LG 50PC3D shuts off... bad caps?

                  Well I need to get it fixed before school coming up less than two weeks from now. Is there anyway to pinpoint which board is causing the issue. I can get the main board and power board off eBay and return the one I don't need. However, could it be the board where all the inputs come in? Please let me know. Thanks

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #49
                    Re: LG 50PC3D shuts off... bad caps?

                    Originally posted by akk944
                    Well I need to get it fixed before school coming up less than two weeks from now. Is there anyway to pinpoint which board is causing the issue. I can get the main board and power board off eBay and return the one I don't need. However, could it be the board where all the inputs come in? Please let me know. Thanks
                    The board with the inputs is the main board. There may also be a separate "AV board" with additional inputs, at least there is on the UK version, cannot be sure about US version. Have you tried to see if a dimmer picture will make the set run longer? This would lower temperatures quite a bit. If so, it could be a cold joint.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • akk944
                      Senior Member
                      • Aug 2012
                      • 60
                      • USA

                      #50
                      Re: LG 50PC3D shuts off... bad caps?

                      http://www.ebay.com/itm/LG-50PC3D-UC...ht_2252wt_1037

                      so what's that board? should that board be okay or could that also be bad. I can't run the TV long enough to dim it so can't test that. I know its probably something simple, but I am going away and need to get this thing fixed! Again, any help on pinpointing which board is bad would be greatly appreciated. THanks!

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #51
                        Re: LG 50PC3D shuts off... bad caps?

                        If it displays no signal and still shuts down, it sounds pretty bad - if you flash up a menu using the buttons on the unit does it shut down really quickly? This TV should also have a white screen option in the menu if you can access it easily, it is buried under a few sub menus.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • akk944
                          Senior Member
                          • Aug 2012
                          • 60
                          • USA

                          #52
                          Re: LG 50PC3D shuts off... bad caps?

                          No, the antenna in and component inputs work and I get a signal with video and sound for a brief period of time. I'll try seeing if I can get it to stay on long enough for a white screen in 10 minutes. Let me know if there's anything else I should do. THanks

                          Comment

                          • akk944
                            Senior Member
                            • Aug 2012
                            • 60
                            • USA

                            #53
                            Re: LG 50PC3D shuts off... bad caps?

                            Well I figured something out. The TV doesn't shut off when the DVD player isn't hooked up... so I was able to go through the menu easily, BUT didn't find any white out option. Anyway, now that I know how to keep the TV on, what could be the problem. I am about to try with HDMI and see if the same problem exists. Let me know. Thanks...

                            Comment

                            • akk944
                              Senior Member
                              • Aug 2012
                              • 60
                              • USA

                              #54
                              Re: LG 50PC3D shuts off... bad caps?

                              Okay so I ripped out that board you guys were talking about and a number I got off the board is 68709M0734b. So I know I've been bouncing around a lot, but this sums up most of it.

                              TV shuts off after a short period of time when there is a active signal.
                              The TV didn't turn off by itself for over an hour when there was no active signal.
                              There doesn't seem to be any bad caps on the power board.
                              Creating a bridge as mentioned earlier on the power board did not fix the problem.
                              I still have no idea which board is causing the problem!

                              Let me know if you guys need any more information. Thanks

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK

                                #55
                                Re: LG 50PC3D shuts off... bad caps?

                                Originally posted by akk944
                                Okay so I ripped out that board you guys were talking about and a number I got off the board is 68709M0734b. So I know I've been bouncing around a lot, but this sums up most of it.

                                TV shuts off after a short period of time when there is a active signal.
                                The TV didn't turn off by itself for over an hour when there was no active signal.
                                There doesn't seem to be any bad caps on the power board.
                                Creating a bridge as mentioned earlier on the power board did not fix the problem.
                                I still have no idea which board is causing the problem!

                                Let me know if you guys need any more information. Thanks
                                I didn't realise it didn't shut down with no active signal. If you press MENU with no active signal (to get up the control panel) does it shut down quicker?
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment

                                • akk944
                                  Senior Member
                                  • Aug 2012
                                  • 60
                                  • USA

                                  #56
                                  Re: LG 50PC3D shuts off... bad caps?

                                  I didnt notice it either until last night...but no i played around with the menu for a while and nothing happenend.

                                  Comment

                                  • tom66
                                    EVs Rule
                                    • Apr 2011
                                    • 32560
                                    • UK

                                    #57
                                    Re: LG 50PC3D shuts off... bad caps?

                                    Originally posted by akk944
                                    I didnt notice it either until last night...but no i played around with the menu for a while and nothing happenend.
                                    Do you have a HDMI source? It could be a firmware bug causing it to crash with some video inputs.
                                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                    Comment

                                    • akk944
                                      Senior Member
                                      • Aug 2012
                                      • 60
                                      • USA

                                      #58
                                      Re: LG 50PC3D shuts off... bad caps?

                                      Hdmi clicks right off as well... coax stays on for a bit then does the same...

                                      Comment

                                      • selldoor
                                        Slow Learner
                                        • Dec 2010
                                        • 7870

                                        #59
                                        Re: LG 50PC3D shuts off... bad caps?

                                        If you can now get the menu to stay on can you find a factory reset option?
                                        Please upload pictures using attachment function when ask for help on the repair
                                        http://www.badcaps.net/forum/showthread.php?t=39740

                                        Comment

                                        • akk944
                                          Senior Member
                                          • Aug 2012
                                          • 60
                                          • USA

                                          #60
                                          Re: LG 50PC3D shuts off... bad caps?

                                          Yeah i can. I tried that last night and still nothing.

                                          Comment

                                          Related Topics

                                          Collapse

                                          • momaka
                                            Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
                                            by momaka
                                            I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

                                            For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

                                            https://www.badcaps.net/filedata/fetch?id=3591771


                                            https://www.badcaps.net/filedata/fetch?id=3591772

                                            It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

                                            https://www.badcaps.net/filedata/fetch?id=359177...
                                            03-12-2025, 03:42 PM
                                          • eryjus
                                            Heathkit IO-4205 Power Supply Caps
                                            by eryjus
                                            Hello,

                                            First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                                            I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                                            I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                                            ...
                                            05-10-2023, 11:21 AM
                                          • Paxman_Swede
                                            Identifying caps on an old Zoom 9000
                                            by Paxman_Swede
                                            Hello!

                                            I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

                                            The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

                                            I have studied the board and...
                                            01-14-2025, 09:51 AM
                                          • captain150
                                            Help with switching power supply caps
                                            by captain150
                                            I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                                            I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                                            03-16-2025, 07:34 PM
                                          • Foetuss
                                            Gigabyte GA-6OXT :: caps question
                                            by Foetuss
                                            Good evening

                                            I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
                                            Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

                                            But I was also suprised about the bigger boys, which are 330µF 25V.
                                            Could it be they used 25V caps because they were cheaper / available at that time?...
                                            02-11-2025, 12:22 PM
                                          • Loading...
                                          • No more items.
                                          Working...