Samsung LN40A650 triple vision picture help!

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • XmouseX
    Senior Member
    • Aug 2011
    • 158
    • US
    #21
    Re: Samsung LN40A650 triple vision picture help!

    Well I didnt have any foam so I cut pieces out of a Styrofoam block and used double sided tape. Then because the Styrofoam didnt have much give, I made custom clamps to squeeze the metal frame against the styrofoam. Wahlaa the TV works like new

      Comment

      • davedavid85
        New Member
        • Jul 2014
        • 3
        • United States of America
        #22
        Re: Samsung LN40A650 triple vision picture help!

        I had a double image problem with my Samsung and was able to fix it for $0.00 all by myself. Check out this video on YouTube.

        www.youtube.com/watch?v=j7vl7-vZEL8

        by David Koenig

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA
            #23
            Re: Samsung LN40A650 triple vision picture help!

            It looks like it has contacts problem between the connectors and the ribbon cable, did you also try cleaning the contacts?
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • Shinju
                Badcaps Legend
                • Mar 2014
                • 1239
                • USA
                #24
                Re: Samsung LN40A650 triple vision picture help!

                Doing that fix in the video, when the panel is HOT/On could damage the T-con no? I learned my lesson about that with a Plasma so I have always reseated/cleaned any ribbon cables with the panel off.

                  Comment

                  • tibimakai
                    Badcaps Legend
                    • Jan 2012
                    • 3680
                    • USA
                    #25
                    Re: Samsung LN40A650 triple vision picture help!

                    Last time when I did that, I blew a fuse.

                      Comment

                      • budm
                        Badcaps Legend
                        • Feb 2010
                        • 40746
                        • USA
                        #26
                        Re: Samsung LN40A650 triple vision picture help!

                        I am surprised too that the T-CON or the TFT IC did not get damaged when doing live inserting of the ribbon cable, the conductor pitches are so fine and you can easily cross the conductors if you do not insert the cable in straight.
                        Never stop learning
                        Basic LCD TV and Monitor troubleshooting guides.
                        http://www.badcaps.net/forum/showthr...956#post305956

                        Voltage Regulator (LDO) testing:
                        http://www.badcaps.net/forum/showthr...999#post300999

                        Inverter testing using old CFL:
                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                        http://s807.photobucket.com/user/budm/library/

                        TV Factory reset codes listing:
                        http://www.badcaps.net/forum/showthread.php?t=24809

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • Document Archive
                            Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                            by Document Archive
                            This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                            09-07-2024, 05:50 AM
                          • TR103
                            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                            by TR103
                            Hi, I have a Samsung UE50TU with:
                            - sound and backlight, but no picture
                            - when it arrived, it had a picture for a few seconds
                            - it keeps rebooting
                            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                            - without cable between mainboard and lcd panel and with a jumpered...
                            01-22-2025, 04:12 PM
                          • JJAAMM
                            SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                            by JJAAMM
                            This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                            Problem
                            TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                            07-06-2023, 06:01 AM
                          • Mgiffune
                            Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                            by Mgiffune
                            I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                            I ordered a supposedly ‘new' Tcon board this time, and                            ...
                            06-09-2024, 10:28 AM
                          • Dodgethis
                            Samsung QN75Q6DRA, No Picture, Has BL, and Sound
                            by Dodgethis
                            Hello all,

                            This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
                            5 Photos
                            09-11-2024, 07:39 AM
                          • Loading...
                          • No more items.
                          Working...