Panasonic G20 Failure :/

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JosQuelqu1
    Member
    • Dec 2012
    • 13
    • Canada

    #41
    Re: Panasonic G20 Failure :/

    Yeah you're right! I see it now.

    It doesn't glow on the SC and the SS when the SC power is plugged in.

    Thank you!
    Last edited by JosQuelqu1; 12-01-2012, 10:03 PM.

    Comment

    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia

      #42
      Re: Panasonic G20 Failure :/

      Originally posted by JosQuelqu1
      Yeah you're right! I see it now.

      It doesn't glow on the SC and the SS when the SC power is plugged in.

      Thank you!
      No, that's because it sounds you've suffered a shorted SC board like quit a few of us now so there's no VS voltage being generated by the PSU.

      If you disconnected the power from the SC board, you'll probably find 7 blinks and the LED on the SS board will illuminate for a few seconds then gradually dim once the 7 blinks and shutdown occurs.

      Comment

      • JosQuelqu1
        Member
        • Dec 2012
        • 13
        • Canada

        #43
        Re: Panasonic G20 Failure :/

        Exactly.

        Where can I order the SC board??
        Last edited by JosQuelqu1; 12-01-2012, 10:56 PM.

        Comment

        • tw2005
          Badcaps Legend
          • Oct 2011
          • 6458
          • Australia

          #44
          Re: Panasonic G20 Failure :/

          Originally posted by JosQuelqu1
          Exactly. So wich board is defect?
          Oh, I thought Tom had pointed that out. If you've disconnected the SC and now get 7 blink then it's the SC board. I think you said 10 and 4 blinks. I had a straight out 4 blink which is a PSU code but the SC completely shorted the VSus voltage(190-200V) on the PSU so that is why the PSU code but the PSU is not the problem.

          I'd expect if you disconnected the power from SS and had the SC connected you'll still have whatever code you had originally 10 or 4 blink.

          Someone else here recently had 10 blink and was SC board.

          From the manual, 1 of the conditions for 10 blink
          Shorted Vsus (By the SS board or SC board).

          The hard part will be finding a replacement at a good price. Those revisions all worked in my TV. AF was the original board.

          I've purchased 2 extras as spares but it looks like I'm about to lose one to a relative with the same TV

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia

            #45
            Re: Panasonic G20 Failure :/

            Google. ebay, ebay UK, shopjimmy( nearly out of all versions!) and probably a bunch of others you'll find with google. maybe search for broken TVs (screen damage)for sale although this board is suffering a high failure rate I feel so you can't exactly test a broken TV before purchase.

            There are different TNPA5081 for the 42,46,50 & 54" models so you'll have to watch out for that. Not everyone knows what they're selling.

            Comment

            • JosQuelqu1
              Member
              • Dec 2012
              • 13
              • Canada

              #46
              Re: Panasonic G20 Failure :/

              I just wanted to make sure it was the SC.

              Thank you very much both of you. Now I'll try to find the part.

              Comment

              • JosQuelqu1
                Member
                • Dec 2012
                • 13
                • Canada

                #47
                Re: Panasonic G20 Failure :/

                Found i!

                www hdtvpartstore com

                also on (but out of stock):

                www tristatemodule com
                www retechtv com
                Last edited by JosQuelqu1; 12-02-2012, 03:11 PM.

                Comment

                • JosQuelqu1
                  Member
                  • Dec 2012
                  • 13
                  • Canada

                  #48
                  Re: Panasonic G20 Failure :/

                  No chance for me.

                  I ordered the last the had in stock and it was damaged....

                  Comment

                  • tw2005
                    Badcaps Legend
                    • Oct 2011
                    • 6458
                    • Australia

                    #49
                    Re: Panasonic G20 Failure :/

                    Originally posted by JosQuelqu1
                    No chance for me.

                    I ordered the last the had in stock and it was damaged....
                    You received it and it was damaged or did they not ship it because it was no good.

                    What was broken?

                    I had a quick chat with an Ebay seller GTVWATFORD in the UK who's starting to do up SC board repair kits, Asked him if he had plans for the TNPA5081 and he came back and set yes but still early days as he's testing them and there's one more component he's waiting for.

                    Reckons he'd got 10 boards to build. At least someone out there is having a good go at saving these boards.
                    Last edited by tw2005; 12-03-2012, 01:10 PM.

                    Comment

                    • JosQuelqu1
                      Member
                      • Dec 2012
                      • 13
                      • Canada

                      #50
                      Re: Panasonic G20 Failure :/

                      They did not ship it because it was damaged. I don't know what is broken.

                      Comment

                      • JosQuelqu1
                        Member
                        • Dec 2012
                        • 13
                        • Canada

                        #51
                        Re: Panasonic G20 Failure :/

                        I asked for it but the sales person doesn't know. The warehouse refused to ship it.

                        Comment

                        • tw2005
                          Badcaps Legend
                          • Oct 2011
                          • 6458
                          • Australia

                          #52
                          Re: Panasonic G20 Failure :/

                          They did the right thing. Probably an untested board or they have a policy of checking prior to shipment.

                          They're out there but not too cheap.

                          Comment

                          • JosQuelqu1
                            Member
                            • Dec 2012
                            • 13
                            • Canada

                            #53
                            Re: Panasonic G20 Failure :/

                            YES!

                            After a couple of emails Panasonic finaly agreed to repair the TV free of charge. I have to bring the TV to the service center this saturday.

                            Comment

                            • aecky01
                              New Member
                              • Nov 2012
                              • 2
                              • USA

                              #54
                              Re: Panasonic G20 Failure :/

                              Originally posted by aecky01
                              Quick question, I'm experiencing the same problems as the OP (2 year old 50G20). What board part number are you guys purchasing? The service manual shows TNPA5081, and the sticker on my SC board shows TNPA5081AF. I cannot find a board with the last two characters AF anywhere on the web. Would a TNPA5081AW board be similar enough?

                              Sorry for the confusion, first time trying to fix my TV.
                              FYI, I ordered a new SC board from shopjimmy http://www.shopjimmy.com/panasonic-t...u-sc-board.htm, replaced the board and everything is working perfectly. The board is version AP, so I can confirm these are compatible with the 50G20.

                              Thanks for the help guys! So happy not to have to buy a new tv.

                              Comment

                              • tw2005
                                Badcaps Legend
                                • Oct 2011
                                • 6458
                                • Australia

                                #55
                                Re: Panasonic G20 Failure :/

                                Originally posted by JosQuelqu1
                                YES!

                                After a couple of emails Panasonic finaly agreed to repair the TV free of charge. I have to bring the TV to the service center this saturday.
                                Well done. I sent an email myself letting them know how problems people are having.

                                I suspect by the response they can't admit liability but I got the idea that they would have assessed and repaired it out of warranty too.

                                Problem is i buy these to fix so i can't really claim to be the original owner with no receipt and that's who they want to look after.

                                I've had one item with Panasonic done out of warranty like that in 21 years.probably why I stick with the brand.

                                Maybe put a separate post up explaining what happened as it may help others get the same deal.

                                Comment

                                • tw2005
                                  Badcaps Legend
                                  • Oct 2011
                                  • 6458
                                  • Australia

                                  #56
                                  Re: Panasonic G20 Failure :/

                                  Originally posted by aecky01
                                  FYI, I ordered a new SC board from shopjimmy http://www.shopjimmy.com/panasonic-t...u-sc-board.htm, replaced the board and everything is working perfectly. The board is version AP, so I can confirm these are compatible with the 50G20.

                                  Thanks for the help guys! So happy not to have to buy a new tv.
                                  It certainly does, another happy repair. good job.

                                  Comment

                                  • JosQuelqu1
                                    Member
                                    • Dec 2012
                                    • 13
                                    • Canada

                                    #57
                                    Re: Panasonic G20 Failure :/

                                    Originally posted by tw2005
                                    Maybe put a separate post up explaining what happened as it may help others get the same deal.
                                    I've only been insistant. But yes I can explain what happen. I'll see this saturday if all goes well with television.

                                    Comment

                                    • Stanislav
                                      Senior Member
                                      • Dec 2012
                                      • 135
                                      • Bulgaria

                                      #58
                                      Re: Panasonic G20 Failure :/

                                      Apologies error
                                      Last edited by Stanislav; 12-10-2012, 11:46 AM.

                                      Comment

                                      • JosQuelqu1
                                        Member
                                        • Dec 2012
                                        • 13
                                        • Canada

                                        #59
                                        Re: Panasonic G20 Failure :/

                                        Originally posted by JosQuelqu1
                                        I've only been insistant. But yes I can explain what happen. I'll see this saturday if all goes well with television.
                                        My TV is back to life! I can't enjoy it again. I hope this will last for a loooonng time.

                                        Comment

                                        • aleshaak
                                          New Member
                                          • Jan 2013
                                          • 3
                                          • Czech Republic

                                          #60
                                          Re: Panasonic G20 Failure :/

                                          Hi! i am try to repair my father panasonic P46g20 plasma.
                                          Probably it is a P-Board, because LED blink 4times. But is imposible buy new P-Board here in Czech Republic, so may i just change some caps on P-Board? Do you knou which of them?

                                          Thanks and sorry form my bad english.

                                          Comment

                                          Related Topics

                                          Collapse

                                          • Tynan Dill
                                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                            by Tynan Dill
                                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                            Upon bringing it home and plugging it up, it showed a standby light.

                                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                            Assuming...
                                            11-22-2024, 01:46 PM
                                          • m1ch43lzm
                                            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                            by m1ch43lzm
                                            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                            05-12-2025, 08:37 PM
                                          • sam_sam_sam
                                            Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                                            by sam_sam_sam
                                            I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                                            This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                                            After all of...
                                            07-13-2024, 08:14 PM
                                          • canadaboy25
                                            Panasonic TC-P54VT25 No image. A or D board?
                                            by canadaboy25
                                            I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                                            The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                                            I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                                            01-17-2021, 01:06 AM
                                          • Biruslapio
                                            Panasonic P50VT20B Plasma 12 Blinks, Power Supply or A-Board?
                                            by Biruslapio
                                            Hello, I've had this TV for 3 years, 2 years ago it stopped working signaling 12 Blinks, SOUND_SOS according to the service manual.

                                            It has no VSUS or VDAT, and P15V has 1.0V instead, the same 15V goes to A board. F15V is ok and other main voltage rails.

                                            It seems the power supply is defective, since unplugging D20 ribbon cable that goes from D-board to SC-board makes the behavior change, the TV stays on, there's no image nor VSUS, but 15V reads 2.4V, high enough to not trip the SOS 12 blinks, so it stays on, fans do not spin but I left it 2 hours, green led lit up...
                                            02-16-2021, 09:44 PM
                                          • Loading...
                                          • No more items.
                                          Working...