This guy has a Soyo DYLT032D....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Paul678
    Badcaps Veteran
    • Nov 2011
    • 402

    #1

    This guy has a Soyo DYLT032D....

    .....he claims to know that it's the main board
    which is bad, because he said that he swapped it for
    another main board from another unit, and
    the screen worked.

    Then he said he didn't want to fix it,
    because the main board was like $60. So
    apparently, he has more than one unit lying
    around. He claimed to be some sort of IT
    guy, so working with electronics is nothing
    new to him. Actually, I just did an Ebay search,
    and there was only a power supply and inverter.
    It may be hard to get a main board for this particular
    model, which may be why he's selling it.

    I'm sure everyone here has heard the old, "It's an
    easy Fix" story. If it's so goddamned easy and
    cheap to fix, why don't YOU do it and sell it as
    working for a whole lot more????

    Dunno if this guy is bullshitting me....but maybe
    I'll offer him $5......

    Some of the reviews on this TV were actually not very good,
    in terms of image quality.
    Last edited by Paul678; 03-07-2012, 02:36 AM.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: This guy has a Soyo DYLT032D....

    Would be very cautious when people tell you what they know the fault is! 99% of the time they are completely and utterly wrong.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • cmj21973
      Badcaps Veteran
      • Feb 2010
      • 267
      • USA

      #3
      Re: This guy has a Soyo DYLT032D....

      Here's on:
      http://www.shopjimmy.com/soyo-lrm303...-main-unit.htm

      There is one on Ebay, but they're asking way too much!
      http://www.ebay.com/itm/Soyo-DYLT032...item1c20473d8c
      Last edited by cmj21973; 03-07-2012, 03:36 AM.

      Comment

      • Paul678
        Badcaps Veteran
        • Nov 2011
        • 402

        #4
        Re: This guy has a Soyo DYLT032D....

        Originally posted by tom66
        Would be very cautious when people tell you what they know the fault is! 99% of the time they are completely and utterly wrong.

        Yeah, once again, if they REALLY knew what the problem is,
        why the Hell don't they fix it themselves?

        It's real bullshit, some of things people will say to
        sell a broken TV.

        Still, if I get it for $5, I'll still should be able to make $
        off the parts.

        On the other hand, I've been on such a successful
        repair roll, that I don't want to break my good record!!!

        LOL!!!

        I'll probably pass on this one, unless he wants to
        give it to me for free.....

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: This guy has a Soyo DYLT032D....

          Remember it's only 32" and probably 720p. Price according to this.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • Mr Bill
            Badcaps Veteran
            • Nov 2011
            • 648
            • USA

            #6
            Re: This guy has a Soyo DYLT032D....

            Originally posted by Paul678
            It's real bullshit, some of things people will say to
            sell a broken TV.
            Someone listed on craigslist their 42" lcd tv was broken. I asked if the screen was cracked and he said no. But when i asked what it was doing he sent me a picture. I said "hey that screen sure looks broke to me" He then replies that it just deteriorated to the picture in a 3 month span.
            Attached Files

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #7
              Re: This guy has a Soyo DYLT032D....

              "it just deteriorated to the picture in a 3 month span" Mr Bill, that is really funny, I am sure one of his kid was playing WEII.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • Paul678
                Badcaps Veteran
                • Nov 2011
                • 402

                #8
                Re: This guy has a Soyo DYLT032D....

                Originally posted by Mr Bill
                Someone listed on craigslist their 42" lcd tv was broken. I asked if the screen was cracked and he said no. But when i asked what it was doing he sent me a picture. I said "hey that screen sure looks broke to me" He then replies that it just deteriorated to the picture in a 3 month span.

                Problem is, sometimes the screen will get cracked
                AFTER the inverters stop working (kids throw a ball
                at the screen, etc.), so even the seller won't know about
                the damage.

                This happened to me when I got the Komodo for
                $15, and only discovered the cracked screen after replacing
                the inverter fuse.

                But I recently sold the power supply on Ebay for $69,
                and I'm still selling the main board, repaired inverters, control
                board, and the base stand.

                So......ALL GOOD!

                Comment

                Related Topics

                Collapse

                • cheeky2
                  Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                  by cheeky2
                  I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                  Obviously the same LVDS connector for the screen connection...
                  05-25-2024, 03:27 AM
                • Dani_2024
                  Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                  by Dani_2024
                  Hi and thanks in advance for any input you might provide!
                  I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                  Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                  Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                  10-28-2024, 05:06 PM
                • Asraf Atb
                  Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                  by Asraf Atb
                  Hi everyone,

                  Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                  Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                  I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                  01-27-2025, 05:02 PM
                • JSin21
                  Compatibility of main boards between different variations of samsung MU6100
                  by JSin21
                  Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

                  I have Samsung Smart TV UA65MU6100WXXY version DA01

                  Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
                  11-27-2023, 04:54 AM
                • jb_Bak
                  Sony xbr-65x900c main board issues?
                  by jb_Bak
                  Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                  Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                  Power Board Connector that goes to Main board
                  CN6401
                  Pin 01 NC
                  Pin 02 NC
                  Pin 03 "BL_ON": 0V
                  Pin 04 "N/C"
                  Pin 05 "STBY 3.3V": 3.5V
                  Pin 06 "GND": N/C
                  Pin 07 "AC_OFF"...
                  09-27-2021, 04:52 PM
                • Loading...
                • No more items.
                Working...