Samsung LN26A450C1D No Power

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Scenic
    o.O
    • Sep 2007
    • 2642
    • Germany
    #21
    Re: Samsung LN26A450C1D No Power

    Probably forgot his password.. (?!)
    There's a password revovery function in pretty much every forum. Notice the links below the login field (especially after a failed login attempt).

      Comment

      • canadapettit
        Member
        • Feb 2012
        • 16
        #22
        Re: Samsung LN26A450C1D No Power

        OK I got it firgured out and fixed. Thank you very much Scenic because without that diagram you gave me, and i apoligize for jumping the gun saying it shouldn't work. The problem was the power supply control ic was bad, along with an 18 volt zeiner and an open fuse resistor. $4.00 worth of part and we are going.

          Comment

          • 23six
            New Member
            • Aug 2012
            • 1
            • USA
            #23
            Re: Samsung LN26A450C1D No Power

            Can u post pics of what u changed plz

              Comment

              • kymatica101
                New Member
                • Oct 2012
                • 1
                • USA
                #24
                Re: Samsung LN26A450C1D No Power

                I'm having the same problems with the exact model tv, is there anyway you can point out what exactly is needed to be replaced... part numbers (of power supply IC, 18volt zeiner and open fuse resistor) or diagram using a picture if possible. I would appreciate your help very much!

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA
                    #25
                    Re: Samsung LN26A450C1D No Power

                    What is the part number as printed on the board? BN-XXXXXXXX?
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • Tynan Dill
                        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                        by Tynan Dill
                        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                        Upon bringing it home and plugging it up, it showed a standby light.

                        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                        The screen seems to blackout and stay black, but with a flashlight I can see the display.

                        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                        Assuming...
                        ORIGINAL POWER SUPPLY BOARD
                        7 Photos
                        11-22-2024, 01:46 PM
                      • PantherDave
                        Microsoft Surface Pro (5th gen) model 1796 - no power
                        by PantherDave
                        Hi all!

                        I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                        I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                        https://www.badcaps.net/forum/troubl...-hardware-devi...
                        05-29-2024, 02:01 PM
                      • GLISIT
                        Asus Probook P5440UF-XB74 power issue
                        by GLISIT
                        Hi all,

                        TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                        I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                        A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                        01-16-2025, 02:29 PM
                      • hill01
                        Samsung UE75MU7009TXZG Endless Power Cycle
                        by hill01
                        Samsung UE75MU7009TXZG Endless Power Cycle

                        Hi everyone and thanks in advance for any help I might get here

                        My Samsung TV is about 4 years old. The exact model number is UE75MU7009TXZG.
                        About half a year ago I started seeing occasional green frames pop up while watching movies. I mean literally green frames. Not the image turning green, but the entire screen turning green for a split second. This happened maybe once or twice during a 2 hour movie. So no big deal, but clearly something was not quite right.

                        Since a few days, the TV won't turn...
                        11-17-2021, 02:52 PM
                      • sam_sam_sam
                        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                        by sam_sam_sam
                        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                        03-31-2024, 02:12 PM
                      • Loading...
                      • No more items.
                      Working...