Vestel based 16" LCD: PSU ticking

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • notallbad
    Badcaps Legend
    • Oct 2012
    • 1183
    • UK
    #21
    Re: Vestel based 16" LCD: PSU ticking

    Hi Giag
    I suggest you start your own thread with tv make and model in title and then describe your fault with pictures of the boards in the message, you will get help!
    This is an old thread and doubt the original poster will reply with a response.
    Good luck.

      Comment

      • giagiuf
        New Member
        • Jul 2013
        • 3
        • Italy
        #22
        Re: Vestel based 16" LCD: PSU ticking

        OK!

        Thank you very much!!!

        Regards.

        Gianluca.

          Comment

          • rafa805
            Member
            • Oct 2013
            • 19
            • Portugal
            #23
            Re: Vestel based 16" LCD: PSU ticking

            Hello everyone. I have a problem with this exactly same board (17IPS16-3 V2), the problem is that one of the componentes has blown up and i cant identify it in order for me to change it, so i would like to know if anyone can help me with this, i uploaded a photo so you can see what i'm talking about:



            Best Regards.

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK
                #24
                Re: Vestel based 16" LCD: PSU ticking

                Schematic


                Look up part number (Qxxx)

                If Q802 is part that's blown also replace: D809, R825, R823, Q801, R827, IC805.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • rafa805
                    Member
                    • Oct 2013
                    • 19
                    • Portugal
                    #25
                    Re: Vestel based 16" LCD: PSU ticking

                    Originally posted by tom66
                    Schematic


                    Look up part number (Qxxx)

                    If Q802 is part that's blown also replace: D809, R825, R823, Q801, R827, IC805.
                    That's exactly the part that's blown, the problem is that in the schematic there are 2 references associated to this part in particular, MTP6N60E and SSP7N60A, so which one is the correct one? Or am i in any way misunderstanding this?

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK
                        #26
                        Re: Vestel based 16" LCD: PSU ticking

                        Either is acceptable but I would choose 7N60 over 6N60.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • rafa805
                            Member
                            • Oct 2013
                            • 19
                            • Portugal
                            #27
                            Re: Vestel based 16" LCD: PSU ticking

                            Originally posted by tom66
                            Either is acceptable but I would choose 7N60 over 6N60.
                            Would a P7NB60FP by any chance work here properly?

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK
                                #28
                                Re: Vestel based 16" LCD: PSU ticking

                                A quick inspection seems to show the major parameters are close enough for an acceptable substitution.
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • rafa805
                                    Member
                                    • Oct 2013
                                    • 19
                                    • Portugal
                                    #29
                                    Re: Vestel based 16" LCD: PSU ticking

                                    I asked if that one could replace the official ones because in Portugal those were not available, however, this week I'm in Switzerland and I was wondering whether I can find the SSP7N60A here? I don't know any stores or even any place where I can search so I would like to know if you can help, do you know if I can get this here and where?

                                    Best Regards.

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK
                                        #30
                                        Re: Vestel based 16" LCD: PSU ticking

                                        I have no idea unfortunately.
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                          Comment

                                          • rafa805
                                            Member
                                            • Oct 2013
                                            • 19
                                            • Portugal
                                            #31
                                            Re: Vestel based 16" LCD: PSU ticking

                                            Thank you anyway.

                                              Comment

                                              Previous 1 2 template Next

                                              Related Topics

                                              Collapse
                                              • nick4275
                                                Vestel Based JVC no picture, leds on
                                                by nick4275
                                                Hoping someone has troden this path before !
                                                I'm looking at a JVC LT-39c790 - a vestel based unit.
                                                So, the remote turns it on, led's light up but no picture at all.

                                                I have a spare mainboard, so I know its not that. The PSU seems ok too.
                                                On the AUO T-Con I've got 16v on HAVDD_H but nothing on HAVDD_L - which I'm assuming should also be 16v ?

                                                So, Ive resorted to testing eveything I can on the board as I can't find any schemas for it (AUO 39T15 C04 Ctrl Bd) and I think I've found a diode gone short. it marked D005 on the board and E1 on the package...
                                                11-21-2023, 04:43 AM
                                              • narf
                                                Epson EB-U42 projector / Caps with 0.7 ohms ?!
                                                by narf
                                                hi all,

                                                first of all: i'm a (motivated) newbie, so please forgive me any stupid question i may or may not ask

                                                i'm currently repairing a projector: Epson EB-U42 that doesn't start (no lights, nothing).

                                                what i've found so far:
                                                - the PSU does its job and supplies 12V to the mainboard via the connector.
                                                - shortly thereafter, there is a mosfet (TS420-600B) where i can test 12V on the one side (in the data sheet this side is called Anode), Gate 0V, Kathode shorted to ground
                                                - not far away, there's the first cap with a resistance of 0.7 ohms....
                                                07-02-2024, 03:53 PM
                                              • France_53
                                                Vestel tv, how to flip the image?
                                                by France_53
                                                Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
                                                05-12-2024, 05:22 AM
                                              • bauto601
                                                KDM 480W PSU upgrade succes! (opinions?)
                                                by bauto601
                                                Back in 2020 i bought a (2nd hand) compact ATX psu to replace my current one. My PC case only fits very short ATX power supplies so i didn't really have the choice of buying a decent 80Plus unit. The current unit is a modded YoungYear unit that i made a thread about a while ago:
                                                A "nice" YoungYear unit? - Badcaps

                                                The "new" unit is a KDM-M6480 480W psu, the 480W number is a typical KDM bullshit claim of course, but the 24A rating on the 12V rail seemed reasonable and the "Active PFC" claim gave me a bit of hope that this was going to be decent-ish....
                                                12-26-2023, 03:05 PM
                                              • massimomax
                                                Firmware TV Hitachi 32HE4500 scheda madre Vestel 17MB211S matrice: VES315UNVL-2D-N11
                                                by massimomax
                                                Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende piΓΉ,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
                                                spero che qualcuno puΓ² averlo per riprogrammare eprom. grazie

                                                Post in English !!!

                                                I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you


                                                ​
                                                02-28-2025, 07:27 AM
                                              • Loading...
                                              • No more items.
                                              Working...