Announcement

Collapse
No announcement yet.

Vestel based 16" LCD: PSU ticking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Vestel based 16" LCD: PSU ticking

    Hi Giag
    I suggest you start your own thread with tv make and model in title and then describe your fault with pictures of the boards in the message, you will get help!
    This is an old thread and doubt the original poster will reply with a response.
    Good luck.

    Comment


      #22
      Re: Vestel based 16" LCD: PSU ticking

      OK!

      Thank you very much!!!

      Regards.

      Gianluca.

      Comment


        #23
        Re: Vestel based 16" LCD: PSU ticking

        Hello everyone. I have a problem with this exactly same board (17IPS16-3 V2), the problem is that one of the componentes has blown up and i cant identify it in order for me to change it, so i would like to know if anyone can help me with this, i uploaded a photo so you can see what i'm talking about:



        Best Regards.

        Comment


          #24
          Re: Vestel based 16" LCD: PSU ticking

          Schematic


          Look up part number (Qxxx)

          If Q802 is part that's blown also replace: D809, R825, R823, Q801, R827, IC805.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #25
            Re: Vestel based 16" LCD: PSU ticking

            Originally posted by tom66 View Post
            Schematic


            Look up part number (Qxxx)

            If Q802 is part that's blown also replace: D809, R825, R823, Q801, R827, IC805.
            That's exactly the part that's blown, the problem is that in the schematic there are 2 references associated to this part in particular, MTP6N60E and SSP7N60A, so which one is the correct one? Or am i in any way misunderstanding this?

            Comment


              #26
              Re: Vestel based 16" LCD: PSU ticking

              Either is acceptable but I would choose 7N60 over 6N60.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                #27
                Re: Vestel based 16" LCD: PSU ticking

                Originally posted by tom66 View Post
                Either is acceptable but I would choose 7N60 over 6N60.
                Would a P7NB60FP by any chance work here properly?

                Comment


                  #28
                  Re: Vestel based 16" LCD: PSU ticking

                  A quick inspection seems to show the major parameters are close enough for an acceptable substitution.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment


                    #29
                    Re: Vestel based 16" LCD: PSU ticking

                    I asked if that one could replace the official ones because in Portugal those were not available, however, this week I'm in Switzerland and I was wondering whether I can find the SSP7N60A here? I don't know any stores or even any place where I can search so I would like to know if you can help, do you know if I can get this here and where?

                    Best Regards.

                    Comment


                      #30
                      Re: Vestel based 16" LCD: PSU ticking

                      I have no idea unfortunately.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment


                        #31
                        Re: Vestel based 16" LCD: PSU ticking

                        Thank you anyway.

                        Comment

                        Working...