Re: A guide to fixing/troubleshooting some common plasma TV problems
All. the. damn. time.
I may request this thread be locked.
All. the. damn. time.
I may request this thread be locked.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: A guide to fixing/troubleshooting some common plasma TV problems
It should be locked or pruned significantly. If I were something looking at the title of this thread, I would expect one or two posts at most from the author. Not a hodge podge of questions on various TVs.
However, I know the feeling. Even when I explicitly say don't ask questions in post #1 of a "how to guide", people can't or won't follow instructions.--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Good job Tom!! I needed some basic plasma troubleshooting, and this is greate, thanks a lot.
Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
i have plasma Panasonic 42inch and i have horizontal line.
Some helpAttached FilesComment
-
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
The plasma panel is likely bad -- not repairable.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Hello, I have a Hitachi 42 inch plasmas, model number: HD42S69. I have a 3 inch thick vertical red line, left of center (if your facing the tv) that sporadically appears, but often. I took it to a repair shop. The guy told me that its not the control board and it isn't the display panel, it's a buffer board. He wanted $200 and he said the part is like $60. I figured I can just do it myself, but I don't know where the buffer board he was talking about is? Can you help me locate it? How do I even know what board is causing the issue?Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
It's more likely just the connection between the X-buffer board and panel. Start a new thread and provide pictures of inside your set, and you can probably fix it yourself.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
All users have permissions to start threads I thought. I'd rather not clutter up this thread even more (it's getting hard to track replies and individuals), so if you can't create a thread, please contact Topcat (administrator) and ask him why you might not be able to do so.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Hello there, just need someone to take a quick glance at the display on this photo to see if this TV is repairable.
Philips 42" Plasma - Model 42PF7320A
Thanks in advance.Attached FilesComment
-
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Looking at the picture, it also looks like the Y-buffer may be bad, but the X-main is causing the discolouring too.Last edited by tom66; 07-18-2013, 01:17 PM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Tom congrats on your wonderful guide!
I have an LG 42PC1DA and when I turn on the the in the morning (when the tv is cold), the image is distorted and pinkish purple, then in clears up and the image is near perfect.
This is very much like the image you show on the guide for this problem :"The picture is slow to update (motion blur) and has a purple or lilac tinge to it."
I dont own voltage testing equipment. Do you think it is a good idea to just change all the fuses on the zsus board?
Please help.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
If the problem gets better over time, it is -unlikely- to be a fuse issue.
It is best to start your own thread and add pictures to it.
A multimeter, essential for all TV repair, is available for under $10 from many good retailers.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
thanks tom, I have started a thread. I will add pics tonight.
Any clues based on the symptions described?
What is strange is the image is perfect after about 5 -15 minutes. But when i turn on cold, it is lavalamp like.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"...
Comment