Source for IC 0Z9938GN - Toshiba 22CV100U

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dignome
    New Member
    • Sep 2011
    • 3

    #1

    Source for IC 0Z9938GN - Toshiba 22CV100U

    Hi forum. I'm Looking for the IC that drives the ccfl flyback circuit on this tv. It is marked "0Z9938GN" and is a 16 pin smd.

    The unit was dead when I got it. No activity on the primary side as in the reservoir capacitor had a good charge but the pwm chip was not running and the npn fet was leaking. Purchased the pwm chip from digikey (SG6742MRSYCT-ND), a replacement fet (TK8A65D(STA4QM)-ND), and a replacement diode for D101 (shorted) which restored most of the smps. Standby voltage and main board are working great and there is an image on the screen but no backlight. The smd chip described above has shorted VDD to Ground. Also one of the two FETs that drive the flyback transformer for the backlight was giving low ohms reading from drain to source. Replaced both of these parts as well (using FDD8424HCT-ND). After removing the 0Z9938GN IC I measured vdd pin which gave ~6 volts so I'm confident replacing this IC will restore the backlight function.

    If you have this part or know of an alternative or where to source this part I'd appreciate your reply.

    Thank you.
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #2
    Re: Source for IC 0Z9938GN - Toshiba 22CV100U

    Originally posted by dignome
    If you have this part or know of an alternative or where to source this part I'd appreciate your reply.
    Ebay.com has several if you search for OZ instead of 0Z (i.e. letter O). Under $5 with free shipping.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    • dignome
      New Member
      • Sep 2011
      • 3

      #3
      Re: Source for IC 0Z9938GN - Toshiba 22CV100U

      Thanks! Once I have it installed I'll update the thread as to whether or not it is working correctly. Not sure what happened to the board to cause soo much damage. Again, thank you.

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271

        #4
        Re: Source for IC 0Z9938GN - Toshiba 22CV100U

        findchips.com is another way to search all the major distributors, but when I used it, there was no supplier for your chip.

        We have seen variations of this chip used in lcd monitors.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

        • dignome
          New Member
          • Sep 2011
          • 3

          #5
          Re: Source for IC 0Z9938GN - Toshiba 22CV100U

          The part arrived yesterday and has been installed. The tv is now fully functional. Sorry there are no pictures. Thanks for your help.

          Comment

          • retiredcaps
            Badcaps Legend
            • Apr 2010
            • 9271

            #6
            Re: Source for IC 0Z9938GN - Toshiba 22CV100U

            Originally posted by dignome
            The tv is now fully functional.
            Good to hear that fixed the problem. Congrats.
            --- begin sig file ---

            If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

            We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

            Please do not post inline and offsite as they slow down the loading of pages.

            --- end sig file ---

            Comment

            • fierce
              Member
              • Nov 2012
              • 14
              • us

              #7
              Re: Source for IC 0Z9938GN - Toshiba 22CV100U

              Where was the ic you replaced? I'm having the same problem with the same model TV. Thank you

              Comment

              • budm
                Badcaps Legend
                • Feb 2010
                • 40746
                • USA

                #8
                Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                Post the pictures of the back of the TV, then we can tell you which one is the inverter board.
                Never stop learning
                Basic LCD TV and Monitor troubleshooting guides.
                http://www.badcaps.net/forum/showthr...956#post305956

                Voltage Regulator (LDO) testing:
                http://www.badcaps.net/forum/showthr...999#post300999

                Inverter testing using old CFL:
                http://www.badcaps.net/forum/showthr...er+testing+cfl

                Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                http://s807.photobucket.com/user/budm/library/

                TV Factory reset codes listing:
                http://www.badcaps.net/forum/showthread.php?t=24809

                Comment

                • fierce
                  Member
                  • Nov 2012
                  • 14
                  • us

                  #9
                  Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                  Nevermind I found it

                  Comment

                  • fierce
                    Member
                    • Nov 2012
                    • 14
                    • us

                    #10
                    Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                    I have a few other tvs,is there another part that can be used there? Or does it have to be the OZ9938GN ?

                    Comment

                    • budm
                      Badcaps Legend
                      • Feb 2010
                      • 40746
                      • USA

                      #11
                      Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                      It has to be the same since the circuits are built based on that IC design, there is no second source for the IC made by O2 Micro.
                      Never stop learning
                      Basic LCD TV and Monitor troubleshooting guides.
                      http://www.badcaps.net/forum/showthr...956#post305956

                      Voltage Regulator (LDO) testing:
                      http://www.badcaps.net/forum/showthr...999#post300999

                      Inverter testing using old CFL:
                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                      http://s807.photobucket.com/user/budm/library/

                      TV Factory reset codes listing:
                      http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment

                      • fierce
                        Member
                        • Nov 2012
                        • 14
                        • us

                        #12
                        Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                        And the other two parts he replaced,a Fet and the PWM,what are those? What do they look like? I'm pretty new to fixing Tvs,so far I've had good luck and fixed a few,I just don't know the names of everything yet. Thanks for the help and info

                        Comment

                        • fierce
                          Member
                          • Nov 2012
                          • 14
                          • us

                          #13
                          Re: Source for IC 0Z9938GN - Toshiba 22CV100U

                          Ok so I replaced that IC and now if I shine a light on it I can see what's on the screen,so im guessing its a backlight issue,what do I need to replace now to solve the backlight problem? Thanks

                          Comment

                          Related Topics

                          Collapse

                          • rddube
                            Toshiba 58L1350UC short on Q301 Drain to source
                            by rddube
                            Hello everyone,

                            Need some help in diagnosing all the ripple effects of a failing Mosfet Q301, which originally was a K13A25D which was shorted Drain to Source.

                            I replaced it with a P16NS25 which had about the same specs, and the TV powered on for a few seconds, but dropped dead again and Q301 was again short on Drain to Source.

                            So started looking at some other components (after removing the shorted Q301) and found diode D301A shorted (took it out of circuit because both D301A and D301B were shorted in circuit, but it turns out D301B is good.
                            ...
                            03-05-2022, 06:05 AM
                          • tony359
                            Faulty CRT AKF12/Philips CM8500: bad flyback?
                            by tony359
                            Hi all,

                            I have a CRT (Acorn AKF12, based on the 240V version of the Philips CM8500) which has stopped working. It's making a high pitched noise but not too high. I know this is symptom of a faulty flyback.

                            What happens when a flyback fails? I see that the main voltages out of the PSU are not reaching rated values, as if there is a short.
                            There are supposed to be 125V/26.5V/15.5V outputs but I am reading something like 48V, 10V and 8V. If I unplug the PSU from the rest of the PCB, I can measure the expected values.

                            Can it be a short somewhere...
                            08-22-2023, 04:39 PM
                          • anlu
                            Vestel Firmware - Toshiba 32W133DN
                            by anlu
                            Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.

                            Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model...
                            02-04-2023, 12:59 AM
                          • zioricci
                            Toshiba P855 only works with battery
                            by zioricci
                            Hi,

                            I have a Toshiba satellite P855 that was previously stuck on the Toshiba logo and I couldn't enter the BIOS with F2 and then, thanks to the 2 original bios files that hardware1 gave me, yesterday I was able to boot it up to Windows 11. I deduced that the fault was the corrupted bios. So all the hardware works, hard drive, graphics card, RAM etc. The problem is that everything works if I power it with only the main battery, as soon as I take it out and put the charging cable in, the laptop, although it always succeeds entering bios with F2, hangs on Toshiba logo. I tried doing...
                            03-31-2023, 01:24 PM
                          • cheeky2
                            Toshiba 49U7763DB (Mainboard: Vestel 17MB120) firmware issues after sporadic power cu
                            by cheeky2
                            I have this Toshiba 49U7763DB Tv which was suffering issues after various electrical power cuts, which happened in quick succession
                            Originally the TV was powering on and then very shortly powering off. I managed to get into the menu structure before powering off and carry out a first time installation of the TV. Which didn't make much difference. I have managed to factory reset (that didn't make any difference either).
                            The firmware inside the 17MB120 is corrupted and is causing some strange issues so my question is does anyone have any suitable firmware for this model?
                            Details:...
                            08-17-2023, 04:34 AM
                          • Loading...
                          • No more items.
                          Working...