I have this TV and at first no picture/ display.
I traced it down to the panel I believe. If I cover a few pins on the lvds cable the display works and has a perfect picture.
However after watching it for a week it reverts back to same problem. When I turn it on it's a blank screen again.
I can verify the power board has all the correct voltages and I can still hear the tv and it powers on and off like it's supposed to. So assuming mainboard is good.
Now after sitting for 2 weeks I turn it on and perfect picture again.
Not sure what else it could be. Any insight would be helpful.
Note I'm only covering 3 pins on the lvds cable there inside the black lines I made
I traced it down to the panel I believe. If I cover a few pins on the lvds cable the display works and has a perfect picture.
However after watching it for a week it reverts back to same problem. When I turn it on it's a blank screen again.
I can verify the power board has all the correct voltages and I can still hear the tv and it powers on and off like it's supposed to. So assuming mainboard is good.
Now after sitting for 2 weeks I turn it on and perfect picture again.
Not sure what else it could be. Any insight would be helpful.
Note I'm only covering 3 pins on the lvds cable there inside the black lines I made
Comment