Samsung UN55H6350 Logo Only

[handsworth]

Just picked up this unit for $10. When turning on, I get the Smart TV logo and then it goes away. Backlights are still lit but no image. Just the blueish gray. I can see all the lights are on from the back. Tv does not respond to remote either. My first thought was bad MB, but they are really expensive. Any thoughts that the T Con is bad? I already tried removing 1 at a time and got same results. Any thoughts before I spring for a new board?

[lotas]

Re: Samsung UN55H6350 Logo Only

The problem is in the eMMC firmware.

[Diah]

Re: Samsung UN55H6350 Logo Only

RC mapping saved on SPI, beside the eMMC main firmware... try freeze with freeze Spray the SPI and eMMC one by one then turn on.

[jkb242]

Re: Samsung UN55H6350 Logo Only

Just picked up this unit for $10. When turning on, I get the Smart TV logo and then it goes away. Backlights are still lit but no image. Just the blueish gray. I can see all the lights are on from the back. Tv does not respond to remote either. My first thought was bad MB, but they are really expensive. Any thoughts that the T Con is bad? I already tried removing 1 at a time and got same results. Any thoughts before I spring for a new board?

I have the same set. I Hope you are able to get this fixed but in case you aren't able to fix it, I would be interested in the system board, as mine is likely defective. This is a great forum with lots of very helpful and experienced members.

Thanks