when i plug it in it will turn on and turn right back off imediately if i hit the power button it will do the same anything you can suggest would be great thanks alot
Thanks
STLPheonix
Thanks
STLPheonix
-
-
Re: magnavox / philips 26mf231d
also i have noticed that on the right hand connector on the power supply board the number 2 pin is burnt and the wire that connects to it is burnt a bit too.. any info you can help me with would be much appreciated
Thanks
stlpheonix -
Re: magnavox / philips 26mf231d
Pictures, pictures and more pictures. Just enough to let us see what is going on here. I just want to start off by saying again - I HATE PHILIPS/MAGNAVOX. Ok, now that I got that out of my system. Please take some pics of the affected board and some of the exact area - connector. Sometimes a loose connector will arch to the board causing a buildup of carbon on the pins.The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS
Comment
-
Re: magnavox / philips 26mf231d
ok here is the two pictures the first is of the board it self the second is the only thing that looks burnt (the pin #2) andComment
-
-
Re: magnavox / philips 26mf231d
oh dear.... iv never noticed that ya know!Comment
-
Re: magnavox / philips 26mf231d
sorry about that dont know what i was thinking lolComment
-
Re: magnavox / philips 26mf231d
Yeah the "Manage Attatchments" is the preferred method by this forum.The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS
Comment
-
Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.
It does power up when pressing the power button.
I already try the power button while plugin the plug with no result.
Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.
Could this be an PSU or eMMC issue ? -
Hi is any one can help me on getting the Schematics for Magnavox MDR515H/F7 And Magnavox MDR537H/F7 PDF file thank you I really appreciate it. Just need to change some component on
the main board and the power supply board. I looked all over for the internet and I cannot find the Schematics sheet for both of them. I don't know where else to look I hope someone can help me...03-07-2025, 01:03 PM -
Hi all,
Wife has 2 Philips hair curling irons half defective - after learning how they're supposed to work and testing them, it turned out that both have defective power cables, and both on the same place; broken wires due to wire bending.
As they were both relatively easy to disassemble, and cables are plugged not soldered (as they can rotate in the handle), I was sure it would be easy to find replacements. But - NO! I'm unable to find anything similar on ebay or Aliexpress.
Not sure if this is something Philips proprietary, or a standard, but the cable plug... -
Hi
I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
When i applied cable signal to check image, i had normal picture, but TV was restarting.
I downloaded original firmware and applied the update, but the problem remained.
From a colleague i received a "factory package software" which is a lot bigger.
I made another firmware update, but still did not solve the problem.
Somewhere on the way the error got worse, because at the moment the... -
Hello,
I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
I thought maybe the speakers got damaged, so I replaced them - no dice.- Using the internal speakers, it always happens.
- Using the headphone jack, it never happens.
- Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
Comment