LG 70uh6350 no picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kubectl
    New Member
    • Dec 2022
    • 4
    • United States
    #1

    LG 70uh6350 no picture

    Hey, all! I have a LG 70UH6350-UB.BUSMLJR that does not power on. The standby button is lit but pressing power on the television only causes the standby light to flicker once very briefly and remain lit.

    I have torn the back off the TV and am trying to diagnose if its a main board or power board issue. The legend shows various 12v and 24v pins however the 12v legs I do get a reading on only show around 7.5v. If I hit the power button, and set max hold, I see the 12v pins go to almost 12v and the 24v pins hit 24v.

    My guess is that this is a main board issue and the voltages I am reading are standby voltages and something is functioning enough on the mainboard to briefly wake up the TV but nothing happens. Certainly not an expert though and open to any and all input.
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Re: LG 70uh6350 no picture

      can you post a good straight on picture of each board and one of the whole back, as to see how everything is connected.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

        Comment

        • lotas
          Badcaps Legend
          • Jan 2016
          • 4620
          • Russia
          #3
          Re: LG 70uh6350 no picture

          chassis UD64J
          Attached Files

            Comment

            • kubectl
              New Member
              • Dec 2022
              • 4
              • United States
              #4
              Re: LG 70uh6350 no picture

              Originally posted by nomoresonys
              can you post a good straight on picture of each board and one of the whole back, as to see how everything is connected.
              Hopefully the service manual posted is what you need. I will need to return to my dads house (his TV) in order to get any more pictures.

              The service manual states to check the 12v/24v pins and says to check ST-BY 3.5v but no specifics as to which pins. Is that 3.5v the one illuminating the standby light? If so, I have not verified voltage but the light is on.

                Comment

                • kubectl
                  New Member
                  • Dec 2022
                  • 4
                  • United States
                  #5
                  Re: LG 70uh6350 no picture

                  For posterity; Replacing only the main board resolved the issue.

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12206
                      • U.S.
                      #6
                      Re: LG 70uh6350 no picture

                      thanks for the followup, glad to hear it.
                      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • brithepi2k
                          Samsung UE75TU7020k No picture, Standby blinks 2 times
                          by brithepi2k
                          My Samsung UE75TU7020k lights up fine when one of the ribbon cables are disconnected from the main board, lights stay on but not getting half a picture, I do the same with the other ribbon and put the other one in and lights stay on but not getting half a picture. The standby light flashes 2 times then reboots then it then tries to come back on again and just keeps looping until I take either one of the ribbon tables out (doesn’t matter which one I take out it stays lit when either one is out). I’ve tested the backlights but all working with none shorting out, I’ve replaced the main board...
                          2 Photos
                          04-23-2025, 10:05 AM
                        • Tr0ll
                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                          by Tr0ll
                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                          Original T-con:
                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                          First replacement T-con:

                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                          10-07-2023, 07:48 PM
                        • stylishconsultant
                          un60j620dafxza - Samsung No Display Problem
                          by stylishconsultant
                          Hi All,

                          Need help.

                          I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

                          So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
                          problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
                          might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
                          09-04-2024, 03:26 AM
                        • TR103
                          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                          by TR103
                          Hi, I have a Samsung UE50TU with:
                          - sound and backlight, but no picture
                          - when it arrived, it had a picture for a few seconds
                          - it keeps rebooting
                          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                          - without cable between mainboard and lcd panel and with a jumpered...
                          01-22-2025, 04:12 PM
                        • IAmOrion
                          LG55UB850V no picture or audio, just flashing LED's help please?
                          by IAmOrion
                          Hi members, I came across this forum when searching a fault on my LG 55UB850V TV.
                          Rather than hi-jack another members post/thread I thought I should start my own even though it's an almost identical issue.

                          The thread I refer to can be found here:
                          https://www.badcaps.net/forum/troubl...-s-help-please

                          My boards are the same, and my issue it the same. I have NO Picture and NO Sound. Nothing. When first turning on the TV at the...
                          01-28-2024, 06:50 PM
                        • Loading...
                        • No more items.
                        Working...