Brother DCP-J200 Still having paper jam issues, no service manual
I am looking for Service Manual if anyone has it. I would highly appreciate it. The printer has paper jam issues untill now. Cleaned the tray and has been cleared of any debris. Any tips.
-
My Brother j132w is stuck on the paper jam issue, and yes i have checked for stuck papers but nothing there. Im thinking its a software related problem, any help? -
This specification for the HP ProDesk 400 G2 Mini + 2x Pro Slate 8 Paper Folio can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 400 G2 Mini + 2x Pro Slate 8 Paper Folio boardview and ProDesk 400 G2 Mini + 2x Pro Slate 8 Paper Folio schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps...09-12-2024, 03:28 PM
-
I'm getting frustrated troubleshooting a paper shredder. The way the shredder normally works is when you turn the power on, nothing happens until you insert a piece of paper. There is an IR shredder in the shredder and inserting the paper breaks the beam and starts the shredder motor. But now the motor runs constantly, even when no paper is inserted. I've replaced the photodiode and the IR emitter. Also the relay makes a nice clicking sound so I assume it is working too. I don't know what else to check. Here's a photo of the circuit board. The red and black wires marked IR - go to the... -
Anyone can provide the software tools for Brother P-Touch QL-570?
According to the service manual there should exist
On the brother homepage I only can find autopoff.exe and a tool called ptsweep.exe.
I got the QL-570 as defective, but it powered up normal (voltages measured ok) with cutting and paper feed working until a paper roll and driver were installed on the connected pc.
The device now only shows a dim red LED light. Powering on/off doesn't work.
I'll do voltage measurements again to exclude an electrical/power supply problem.... -
hello, I have this Brother J2730-DW printer that was brought to me by a friend, it was supposed to be converted to continues ink but the printer wouldn't turn on completely. The printer powers on and plays a tune but it gets stuck in the brother logo. Upon checking, the printer was infested by many small cockroaches. I do checked the board cleaned and tested some corroded capacitors but all seems to be fine, I couldn't find any short circuit or any missing component on the board. Also checked the power supply and it was working fine.
please help.
Comment