Hi all.
Do PWM chips usually start triggering with only the +ve and -ve connected or do they need other signals before they start working?
I am particularly asking this for the following chip
https://cdn.badcaps-static.com/pdfs/...2d6a23c015.pdf
Is the VDD needed or should the Vin and Gnd be enough?
Do PWM chips usually start triggering with only the +ve and -ve connected or do they need other signals before they start working?
I am particularly asking this for the following chip
https://cdn.badcaps-static.com/pdfs/...2d6a23c015.pdf
Is the VDD needed or should the Vin and Gnd be enough?
Comment