Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

Power supply ripple hall of shame

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Per Hansson
    Super Moderator
    • Jul 2005
    • 5811
    • Sweden

    Power supply ripple hall of shame

    While our PSU hall of shame thread is fun I thought It'd be fun to have a ripple hall of shame thread too

    I'll go first out, it's an industrial PSU that offers +15v -15v -5v +5v rails.
    However it has been mounted on a frame with DC/DC converters for producing +12v and -12v as well.
    The caps for this have gone a bit high ESR
    The measured ripple is around 1700mV, or 1.7v!
    After recapping the ripple is gone, also note that the scale on the scope is 50mV/div instead of 500mV per div in this shot
    -And that's how you know you have a qualifying PSU: the ripple scale needs to be in the volts range or thereabout

    Attached Files
    "The one who says it cannot be done should never interrupt the one who is doing it."
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Power supply ripple hall of shame

    That ripple is so high and repetitive I'd be tempted to say it was down to oscillation in the controller (caused by bad caps) rather than the caps themselves contributing to it.

    My entry. I don't have a scope shot because this was a while ago. But I had a OneHunLo Chinese PSU for an old desktop PC. It had been sitting in this PC unused for a few years so I decided to power up the PC before scrapping it for anything useful.

    When I hooked up the PC to my CRT monitor, I noticed that there were strange "hum bars" on the image, and a kind of diagonal saw-tooth ripple through the horizontal axis of the image (imagine the sides of the image have a kind of saw-tooth effect added to them.) This seemed to vary somewhat with load, when the hard drive was accessing things or if the CPU was under a bit more stress the hum bars got stronger. How odd!

    I scoped the 12V output and found it had 100Hz ripple on it...about 3Vp-p! 5V and 3.3V rail had <0.5Vp-p on them. Remarkably the HDD, CPU VRM and the other parts of the system seemed otherwise content... I can only guess that the sync pulses or some signal produced by the VGA port was a bit fucked causing the hum bars but otherwise there were no obvious ill effects.

    The cause was that the main filter cap was almost open circuit (ESR > 10 ohms, capacitance was about a tenth of the rating), so the output caps were basically handling all of the 100Hz ripple. I'm amazed the supply was able to hold up during the dead periods of the mains cycle. I can only guess that there was enough capacitance on the PSU's 12V output and the CPU VRM bus to keep everything going for the few ms of low switching. The 5V/3.3V rails must have had little load on them or the PSU was more able to regulate them (I don't think it was a DC-DC type though).

    So I guess that if this PC was left running for much longer, those VRM caps would eventually cook and the whole thing would die as it wouldn't have the necessary hold-up to keep going.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    Free service manuals: http://www.toms-service-manuals.com/ -- 72 LED/LCD TVs, 5 monitors, 28 plasma TVs, and 2 AVR 6.1 amplifiers fixed! -- I repair Pioneer 9G Plasma Main Boards & KRP-M01 Media Receivers (PM me for info)

    2 Pioneer KURO 9G, 12 Panasonic LCD/Plasma, 1 Sony LCD, 1 NEC Plasma, 2 Yamaha HTS, 5 Sharp LCDs, 5 Toshiba LCDs, 7 Philips Plasma/LCD, 1 Hitachi Plasma, 11 LG LCD/Plasma, 18 Samsung LED/LCD/Plasma, 1 Thomson Plasma, 1 Atec LCD, 1 Hanspree LCD, 1 Xerox LCD, 1 Harwa LCD, 2 Proview LCD, 2 Hyundai LCD, 1 "Onn" LCD, 1 Grundig LCD, 1 Dell LCD, 1 iiyama LCD, 1 Acer LED, 1 Logik LCD, 1 Baird (China) LCD, 6 Bush LCDs, 22 Vestel LCDs (Best->Worst)

    Comment

    • eccerr0r
      Solder Sloth
      • Nov 2012
      • 8273
      • USA

      #3
      Re: Power supply ripple hall of shame

      I have an on-motherboard 1.2V SMPS that was going about a half volt P-P of ripple due to bad capacitors and going unstable...

      Needless to say the machine isn't very happy, the onboard graphics crashes constantly.

      ---

      An actual PSU, an old Antec PSU whose 3v3 output caps fuhjyyu'ed. Was getting about 1V P-P ripple in it. Machine also was not happy with this and refuses to operate properly. It did allow boot oddly enough.
      Last edited by eccerr0r; 05-24-2018, 03:53 PM.

      Comment

      • CapLeaker
        Leaking Member
        • Dec 2014
        • 6355
        • Canada

        #4
        Re: Power supply ripple hall of shame

        I like Per's scope meter!

        Other than that I had seen PSU's in the 1V to 1.3V ripple territory.
        Last edited by CapLeaker; 05-24-2018, 06:34 PM.

        Comment

        • dmill89
          Badcaps Veteran
          • Dec 2011
          • 2435
          • USA

          #5
          Re: Power supply ripple hall of shame

          This hunk of garbage VIO KY-550ATX, I originally posted in the gutless hall of shame.



          (note: I replaced the two visibly bulged caps with used spares I had laying around)

          I added a little more load 191W total 12V@ 8.5A, 5V@10A, 3.3V @12A


          The scale is set to 200mv (.2V) per division:


          12V (around 1.2V ripple):


          5V (also around 1.2V ripple):


          3.3V (slightly better at around 1V ripple):



          I imagine this thing is about on the verge of blowing up with this load and it is much worse than the already bad ripple with the 137W load in the gutless hall of shame.
          Attached Files

          Comment

          • kaboom
            "Oh, Grouchy!"
            • Jan 2011
            • 2507
            • USA

            #6
            Re: Power supply ripple hall of shame

            VIO for VIOlent!

            A really bad Pow-to-the-Max copy, complete with "bell wire" common mode choke and "two-big, two-small" line rectifiers.
            Refer to my user name and sig...

            You've got ripple (the sawtooth) as well as hunting in the feedback loop (the spikes). What does the "550" even mean in the fake model number?

            How much it draws when tuned for max smoke?

            "pokemon go... to hell!"

            EOL it...
            Originally posted by shango066
            All style and no substance.
            Originally posted by smashstuff30
            guilty,guilty,guilty,guilty!
            guilty of being cheap-made!

            Comment

            • dmill89
              Badcaps Veteran
              • Dec 2011
              • 2435
              • USA

              #7
              Re: Power supply ripple hall of shame

              Originally posted by kaboom View Post
              How much it draws when tuned for max smoke?
              With the 191W load above it draws 286W so around 66% efficiency.

              Comment

              • momaka
                master hoarder
                • May 2008
                • 11941
                • U.S.A.

                #8
                Re: Power supply ripple hall of shame

                Originally posted by Per Hansson View Post
                The measured ripple is around 1700mV, or 1.7v!
                ...
                https://www.badcaps.net/forum/attach...1&d=1527188421
                Nice signal generator, that power supply!

                Unfortunately, I don't have a scope to check the ripple out on some of the crappy gutless PSUs in my collection, but this hunk-o-junk L&C LC-B300ATX probably takes the cake. It was used in a Pentium II computer way back when I didn't know any better about crappy power supplies. Essentially, that Pentium II PC kept crashing over and over in certain heavy-load scenarios (mostly in games). But the PC wasn't power-hungry at all, so it never even crossed my mind that this "300W" PSU could be the reason why (that Pentium II PC was very basic, with only a single HDD and a slow S3 Savage 4 video card). After nearly pulling all of my hair out and swapping various components, I eventually "upgraded" back to the ANS L&C LC-235ATX (also posted in the above link). This made the crashing problems disappear once and for all. ... or at least that's the case until I was given a "new" mobo to "upgrade" with (a Pentium III 933 MHz with 384 MB of RAM and Radeon 7000 video card).

                So for that Pentium II PC to have been crashing under load like it did, my guess would be that this LC-B300ATX PSU probably couldn't provide even 30 Watts of clean power on the 5V rail. I eventually "improved" the LC-B300ATX (mainly added all of the missing caps, removed some load resistors and added some input filtering.) But by that time, I had a much better looking (well, relatively speaking ) Deer DR-250ATX PSU, which I partially recapped with Japanese caps. So eventually the 250W Deer PSU is what I left with the newly-upgraded Pentium III system and still is with it today, working fine. Now even with 3 HDDs and an upgraded GPU (Radeon 9600), the system is rock-stable. The JEE primary input caps (470 uF) in the 250W Deer still have decent hold-up time too. JEE, I am actually surprised, given their reputation.
                Last edited by momaka; 05-25-2018, 09:00 PM.

                Comment

                • eccerr0r
                  Solder Sloth
                  • Nov 2012
                  • 8273
                  • USA

                  #9
                  Re: Power supply ripple hall of shame

                  It's bad when you can see the ripple when the scope is DC coupled...

                  Comment

                  • PeteS in CA
                    Badcaps Veteran
                    • Aug 2005
                    • 3512
                    • USA, Unsure of Planet

                    #10
                    Re: Power supply ripple hall of shame

                    Originally posted by tom66 View Post
                    That ripple is so high and repetitive I'd be tempted to say it was down to oscillation in the controller (caused by bad caps) rather than the caps themselves contributing to it.

                    ...
                    The time scale is 1uS/div, so probably not. Were it 100uS/Div that would be a reasonable guess. And you are correct in suggesting that output caps having gone high ESR could cause oscillation.
                    PeteS in CA

                    Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
                    ****************************
                    To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
                    ****************************
                    Anti-Covid-Vaxxer pig crap claim/prediction, Doctor: Heart Failure from mRNA Jabs "Will Kill Most People" | Principia Scientific Intl. ; Dr. Geert Vanden Bossche Warns COVID-19 Jab Injuries and Deaths Will Soon "Collapse Our Health System" (VIDEO) ; Fully Vaxxed May 2021; Since that time I've done 13 5Ks, 1 8K, 12 10Ks, and 4 half marathons

                    Comment

                    • PeteS in CA
                      Badcaps Veteran
                      • Aug 2005
                      • 3512
                      • USA, Unsure of Planet

                      #11
                      Re: Power supply ripple hall of shame

                      It is necessary when measuring ripple & noise to be sure that spike noise is "real". If you use a ground wire with your probe it may be acting as an antenna, picking up radiated noise. To see if that is happening, connect both your probe ground and your probe tip to PSU output ground. If you see nothing, you're golden; if you see spikes, then part of what you measured was not real.

                      I didn't learn this the easy way, BTW.
                      PeteS in CA

                      Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
                      ****************************
                      To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
                      ****************************
                      Anti-Covid-Vaxxer pig crap claim/prediction, Doctor: Heart Failure from mRNA Jabs "Will Kill Most People" | Principia Scientific Intl. ; Dr. Geert Vanden Bossche Warns COVID-19 Jab Injuries and Deaths Will Soon "Collapse Our Health System" (VIDEO) ; Fully Vaxxed May 2021; Since that time I've done 13 5Ks, 1 8K, 12 10Ks, and 4 half marathons

                      Comment

                      • Per Hansson
                        Super Moderator
                        • Jul 2005
                        • 5811
                        • Sweden

                        #12
                        Re: Power supply ripple hall of shame

                        Originally posted by CapLeaker View Post
                        I like Per's scope meter!
                        Me too, thanks goes out to Fluke Sweden for it
                        Originally posted by PeteS in CA View Post
                        The time scale is 1uS/div, so probably not. Were it 100uS/Div that would be a reasonable guess. And you are correct in suggesting that output caps having gone high ESR could cause oscillation.
                        Yea, here is a shot after recapping when it's connected up to the equipment it supports. (So not running idle like in the first post).
                        Here the operating frequency of the controller can be derived, do note that the time scale is 5µS here instead of 1µS as in the first photos.
                        The originals where Nichicon VX 85°C, I replaced them with UCC KMG 105°C caps.
                        The controller, a LM2940OCT could have used low ESR capacitors according to the datasheet.
                        But I did not look at the datasheet until after the job was done, anyway, system seems to run fine with that amount of ripple, it is after all around 10x less than was there before

                        Originally posted by PeteS in CA View Post
                        It is necessary when measuring ripple & noise to be sure that spike noise is "real". If you use a ground wire with your probe it may be acting as an antenna, picking up radiated noise. To see if that is happening, connect both your probe ground and your probe tip to PSU output ground. If you see nothing, you're golden; if you see spikes, then part of what you measured was not real.

                        I didn't learn this the easy way, BTW.
                        Yes, this is very good advice.
                        I've been bitten also by the fact that the Intel design spec for ATX PSU's specify to use a 0.1uF ceramic and 10uF eletrolytic capacitor at the probing location.
                        I never bothered to and usually that works fine, if you measure with a load.
                        But in one case it was without a load, and the scope was seeing some HF ripple due to that which would have disappeared with any sort of equipment hooked up, so that's worth keeping in mind as well...
                        Attached Files
                        "The one who says it cannot be done should never interrupt the one who is doing it."

                        Comment

                        • stj
                          stj
                          Great Sage 齊天大聖
                          • Dec 2009
                          • 29503
                          • some shithole run by Israeli agents

                          #13
                          Re: Power supply ripple hall of shame

                          does that series of scopemeter still use 4 C cells??

                          Comment

                          • Per Hansson
                            Super Moderator
                            • Jul 2005
                            • 5811
                            • Sweden

                            #14
                            Re: Power supply ripple hall of shame

                            No, it uses a NiMH battery pack called BP190
                            "The one who says it cannot be done should never interrupt the one who is doing it."

                            Comment

                            • CapLeaker
                              Leaking Member
                              • Dec 2014
                              • 6355
                              • Canada

                              #15
                              Re: Power supply ripple hall of shame

                              Here is a link to a KB Power Supply 120-12-8 that I had recently on my bench. It will rock your socks, promise.
                              https://www.badcaps.net/forum/showthread.php?t=71608

                              Comment

                              • Per Hansson
                                Super Moderator
                                • Jul 2005
                                • 5811
                                • Sweden

                                #16
                                Re: Power supply ripple hall of shame

                                This is from a 12v to 5v DC-DC PSU that was installed on an I/O board for a machine.
                                I had some fun with it today, it's sensitive to both heat but then I also noticed physical shocks.
                                I can make it do all kinds of weird things by just poking it
                                The nicest ripple is the one in the big attached picture, about 0.7v
                                Interestingly the 5v output is only at 2v or thereabout when this happens.



                                Originally posted by eccerr0r View Post
                                It's bad when you can see the ripple when the scope is DC coupled...
                                That's a great idea for this thread, when the ripple shows up DC coupeled you know you have a problem that is worthy

                                Attached Files
                                "The one who says it cannot be done should never interrupt the one who is doing it."

                                Comment

                                • Per Hansson
                                  Super Moderator
                                  • Jul 2005
                                  • 5811
                                  • Sweden

                                  #17
                                  Re: Power supply ripple hall of shame

                                  So I got an identical PSU to the one in the first post above.
                                  This one had fared far worse though: the caps either read in the picofarad range or ESR was 0.14K which is the highest my ESR meter can display.
                                  The ripple is around 11.6v on the +12v line!
                                  Yup, I think we have a winner!
                                  I forgot to DC couple however I think you can imagine the result!
                                  With new caps the ripple is completely gone!



                                  With the above I for sure thought I had found the worst possible ripple, I mean how could it be any closer to the actual rail voltage?
                                  But the mainboard this PSU was powering had failed, now my plan is to replace it if I can find something in time.
                                  But customers always want the machines fixed yesterday, so I thought I have nothing to loose: I'll give it a shot.
                                  An N-Channel MOSFET was shorted & popcorned, as was 2x ceramic caps.
                                  I replaced the Si4410DY with a ME4410A that I scavenged from an old laptop mainboard, along with 2x 100nF caps from the same board.
                                  I then started it up but there was no display.
                                  So I started checking things, of course the silly 30mm CPU fan had seized so the board had gotten quite hot, I checked the caps and they seemed to read ESR fine in circuit.
                                  However a cursory ohms check gave very low readings across C40 so I decided to desolder it and check it on my meter: sure enough it reads as a 40ohm resistor on my ESR tester so it is shorted out!
                                  So in its place I put a Samxon GC 2200uF 6.3v cap, mainly because I'm a cheapskate and don't want to sacrifice a nicer cap on a board that might never work (these Samxon caps are around 10 years old now)
                                  I fired it up and to my surprise it went through POST with no issues!



                                  I took some cursory readings with my DMM and everything looked normal except on C36, the meter showed something like -160VDC
                                  I thought obviously that is completely infeasible, must be a bug in my UT61E?
                                  So I was about to bring out my nice Fluke but then decided for the old trusty scope as I anyway had it setup for checking the RGB output on an Amiga 600 I'm fixing.
                                  To my amazement the UT61E was not wrong, the ripple is in the range of 50v!!!



                                  Now obviously the UT61E has some problems to understand such a waveform so it shows a higher value, but still damn!
                                  So I desoldered that cap too and put in another Samxon GC 2200uF 6.3v and the ripple then was an order of magnitude lower!
                                  The system also drew 0.3A less power I could see by coincidence since the bench PSU was in the frame of both pictures.
                                  The crazy thing is that the CPU survived this, it is an Intel Tillamook 266Mhz, they sure don't make em today like they used to!

                                  Attached Files
                                  "The one who says it cannot be done should never interrupt the one who is doing it."

                                  Comment

                                  • momaka
                                    master hoarder
                                    • May 2008
                                    • 11941
                                    • U.S.A.

                                    #18
                                    Re: Power supply ripple hall of shame

                                    Originally posted by Per Hansson View Post
                                    The ripple is around 11.6v on the +12v line!

                                    Ripple?!? More like tsunami waves!!

                                    You know how they say don't connect a speaker to a DC source for a long time, because it will burn out? Well, with this PSU, I think your speaker will be just fine, if not a little "buzzy".

                                    Originally posted by Per Hansson View Post
                                    The crazy thing is that the CPU survived this, it is an Intel Tillamook 266Mhz, they sure don't make em today like they used to!
                                    Nice!!

                                    Comment

                                    Working...
                                    X