Re: Powersupply washingmachine. Relay problem?
The small fuse is ok , it is in the same trace as the door mechanism. Check this link :
https://tweakers.net/ext/f/pM1cYoGVz...nBAOE/full.jpg
The trace for the fuse is on the outer right side of the board and you will find F2 on top.
Do you think this board is a double layered board? I saw a small crack near the small relays. The crack did not damage the traces , i checked it with a multimeter for continuity.
So unless its a multi layered board the traces are all fine.
There are no service manuals for these models right?
The small fuse is ok , it is in the same trace as the door mechanism. Check this link :
https://tweakers.net/ext/f/pM1cYoGVz...nBAOE/full.jpg
The trace for the fuse is on the outer right side of the board and you will find F2 on top.
Do you think this board is a double layered board? I saw a small crack near the small relays. The crack did not damage the traces , i checked it with a multimeter for continuity.
So unless its a multi layered board the traces are all fine.
There are no service manuals for these models right?
Comment