Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

Dell laptop LA90PE0-01 charger repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Re: Dell laptop LA90PE0-01 charger repair

    Originally posted by delaware74b View Post
    Did you reflow the broken solder joint I circled on the back of the board?
    Yes I have. I've actually reflown MANY other joints for good measure
    Wattevah...

    Comment


      #17
      Re: Dell laptop LA90PE0-01 charger repair

      Hi all,

      I found this blog very helpfull, thank you guys!
      I've encountered yet another zero-Ohm "fuse" in my power supply of this type. This 0R resistor does not appear in the schematic. It is placed between the upper winding of Transformer T050 and the anode side of diode "JSW" & R-52k3, on the very top of the schematic. It is marked up by the yellow circle below (the red circle shows the zero Ohm Resistor/"fuse" discussed above).
      BTW.: My supply was way more filled up with the white silicon putty, hardly any area was left open. I guess it had been very cheap on that day of manufacture.

      Cheers,
      eckibear
      Attached Files

      Comment


        #18
        Re: Dell laptop LA90PE0-01 charger repair

        I just registered to thank you for the solution. It helped with my DELL charger as well. Done some measurement. I concluded that the chip was good since the PFC was OK, I got 300V no problems. but measuring arund the optocouples ... got lost. I found a 0 jumper opened. Wondering if the boar design, that has two major holes to fit the low profile transformers (on coil and one transformer) just weakened the board and could crack SMD components. Could be the reason for the silastic flood (YES ... I spent a lot of time cleianing this LOL).

        Many thanks !!!!

        Comment


          #19
          Re: Dell laptop LA90PE0-01 charger repair

          those resistors are used to pass over other tracks, it's possible the person who designed that forgot to take into account how much current was flowing when they chose the resistors.

          Comment


            #20
            Re: Dell laptop LA90PE0-01 charger repair

            Originally posted by stj View Post
            those resistors are used to pass over other tracks, it's possible the person who designed that forgot to take into account how much current was flowing when they chose the resistors.
            Could be, but in this case are related to the optocoupler cricuitry (output side) I dont tink that the current could be that high.

            Comment


              #21
              Re: Dell laptop LA90PE0-01 charger repair

              Well, I know I 'm not that lucky. Second of charger in the batch same symptom. Found the same 0 ohm resistor opened ... but nothing on this one. Chip has HV, VCC is 20V and drops to 15V. every second or so. Like it is trying to start ?. But I cant see ANYTHING in the gates .... nothing. Here is where I got lost. The PFC section is not supposed to work because of the chip ?. I mean, I got 300V on the main cap. But the PFC mosfet is doing nothing ..., at least no activity on its gate. I will re-read above for tips in case I missed something.

              Comment


                #22
                Re: Dell laptop LA90PE0-01 charger repair

                first of all, I want to thank you Dannyx for posting schematic diagram of this very poor builded SPS!! you save me a lot of time!!
                I had a simillar problem like you i.e. thera was no any power at the output but at the same time on first look there was not anything burned inside. like you, I spend some couple of hours for removing this nonsense foam from PCB and upon partial cleaning I start to measure some voltages. so there was the stable 325V across the C051 and also there was stable 21.7V on pin1 of LTA804N so the next thing what I did was checking capacity of all electrolitic capacitors on PCB using the Tonghui LCR meter and without removing capacitors from PCB. all of them were fine so I decided to check all 3 MOSFet and they were fine too. then I decided to search on internet to see if sombode else experienced similar problem and I find this thread. I saw that couple of you had eggzactly the same problem like me and that in yours cases the problem were in bad soldering of 0R resistors so had done checking it and they all were soldered OK. upon that failed atempt, I took osciloscope and checked if there is any waveforme at Q050 gate and I find out that LTA804N was giving some signal which was immediately shuted down so at that point I knowed that some bad soldering is a problem. after checking all components in Q050 circuit I discover that end of 511R resistor which goes to pin 10 of LTA804N was bad soldered and its resoldering resolve my problem.
                once more, thank you all!!!

                Comment


                  #23
                  Re: Dell laptop LA90PE0-01 charger repair

                  Hello, sorry for my bad English, I just faced a repair of this same charger, and the damaged component turned out to be the capacitor that goes to pin 3 of the LTA804, the capacitor was short-circuited, and therefore the charger was turned off on the blue tip LED, and voltage at 0 volts. I hope it helps, and by the way I measured all the things that you attach here and I reviewed some somewhat cloudy welds.
                  Attached Files

                  Comment


                    #24
                    Re: Dell laptop LA90PE0-01 charger repair

                    Or they are very poor quality devices
                    9 PC LCD Monitor
                    6 LCD Flat Screen TV
                    30 Desk Top Switching Power Supply
                    10 Battery Charger Switching Power Supply for Power Tool
                    6 18v Lithium Battery Power Boards for Tool Battery Packs
                    1 XBox 360 Switching Power Supply and M Board
                    25 Servo Drives 220/460 3 Phase
                    6 De-soldering Station Switching Power Supply 1 Power Supply
                    1 Dell Mother Board
                    15 Computer Power Supply
                    1 HP Printer Supply & Control Board * lighting finished it *


                    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                    2 Hem Saw Computer Stack Board

                    All of these had CAPs POOF
                    All of the mosfet that are taken out by bad caps

                    Comment


                      #25
                      Re: Dell laptop LA90PE0-01 charger repair

                      Thanks so much for this thread. My charger was intermittent and then it wouldn't supply hardly any current to charge the battery and would switch off.
                      It must have taken a good three hours to get the case off and dig out all the white plastic but the good bit was finding the 0 Ohm resistor open circuit. I didn't have an 0603 in stock so an 0805 went in and all was well. I also changed the 47uF 35v cap as it was showing a high ESR (approx 1.5 Ohms) which got a lot worse with a touch of freezer.
                      Attached Files

                      Comment


                        #26
                        Re: Dell laptop LA90PE0-01 charger repair

                        Originally posted by midibob View Post
                        Thanks so much for this thread. My charger was intermittent and then it wouldn't supply hardly any current to charge the battery and would switch off.
                        It must have taken a good three hours to get the case off and dig out all the white plastic but the good bit was finding the 0 Ohm resistor open circuit. I didn't have an 0603 in stock so an 0805 went in and all was well. I also changed the 47uF 35v cap as it was showing a high ESR (approx 1.5 Ohms) which got a lot worse with a touch of freezer.
                        I was wondering how long it took you to dig that all out. I took one apart for fun, saw the glue and said nope! If we were lucky, it might be thermoplastic, maybe warming could soften it, but probably not.

                        Comment


                          #27
                          Re: Dell laptop LA90PE0-01 charger repair

                          Yay some one (probably some cheap chinese company) doesn't know how to reliably make a wire!

                          Come to think of it, I've rarely if ever come across a through hole resistor that came up infinite ohms except if it has been mistreated, but for SMT of the few I've worked with... seems more prevalent. Why...

                          Comment


                            #28
                            Re: Dell laptop LA90PE0-01 charger repair

                            thank you

                            Comment

                            Working...
                            X