hp 15s-fq2071tu
-
-
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
What is the fault of the logic board ? Unable to locate a schematic (so far). -
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
https://www.badcaps.net/forum/showpo...9&postcount=20Comment
-
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
Only Quanta 0P5D boardviewComment
-
DA0P5HMB8F1 rev: f schematic needed
hp 15s-fq2071tuComment
-
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
Best regards. Somebody knows PU1101 part number or replacement HP15-dy2064la. I apreciate so much any help.Comment
-
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
i just got one in with the same ic burnt off the board , ill have more of a look on monday when i get back into work but so far i think PU1101 is a SY8386BRHCComment
-
Re: DA0P5HMB8F1 REV F Boardview or schematİc Needed
SchematicComment
-
Lenovo Y50-70 LA-B111P Boardview needed -
Hello, if someone have boardview for HP Pavilion 15 dk , marking on board is HP Pavilion 15 Compal FPC52 LA-H463P Allegro. I have schematics from HP Pavilion Gaming 15 GPC50 LA-J643P rev 1.0 and power button connector and transistor Q80 corresponds to my board and found one boardview file in cad format for LA-H462P and seems that its the same but I don't have actual traces inside or I don't know how to see that from this file.
...04-16-2025, 06:35 AM -
Hello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at... -
Asus TUF B360-PRO GAMING(WIFI) boardview needed, thanks ! -
Hello guys I'm new to board repair. I would like to primarily focus on PC boards, so I picked one up, but now can't find any documentation on it. I found one post with boardview on this forum but it is in a .fz format which my freeboardview program doesn't want to open.
If someone has a PDF of the schematics and the boardview .brd file I would greatly appreciate it.
Thanks!12-19-2024, 02:10 PM
Comment