HP Spectre X360 I need da0x33mbaf0 rev f schematic

[coelectron]

Hello, i need this schematic and board view, thanks in advance.

HP Spectre X360 da0x33mbaf0 rev f

[Italianobg]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

Did you find any schematics? I need them as well.

[Francisco.s]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

Hi, I need this schematic too.

Boardview perhaps?

Thanks.

[Mazorca]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

Schematic still needed. The one for Quanta X31 is similar, but the 3.3, 5.0 buck converters are different.

[hanvey]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

Anybody had gotten the da0x33mbaf0 schematic? I'm looking for it too.

[abrar]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

Anybody had gotten the da0x33mbaf0 schematic? I'm looking for it too.

[mferna14]

Re: HP Spectre X360 I need da0x33mbaf0 rev f schematic

People, still looking for Schematics or Boardview for this Motherboard da0x33mbaf0, if anyone can share with us, thanks in advance

[cappernicus]

If anyone found this schematic/board file I need it as well.

[flusher]

No schematic but perhaps anyone can help telling me the power button pin number on connector to power on without usb board?

[cappernicus]

flusher - A quick probe with a multimeter shows that the power button shorts pin 3 (3rd up from the bottom in your image) to ground through a 1k resistor on that board. In other words, you can power it on by connecting a 1k resistor to ground (any screw hole will do) and touching the other end to pin 3.