Hello-
Anyone have a boardview and schematic for A1181's, like 820-1889-A, 820-2279-A, 820-2213-A, 820-2496-A, etc?
Anyone have a boardview and schematic for A1181's, like 820-1889-A, 820-2279-A, 820-2213-A, 820-2496-A, etc?
-
I bought this on Vinafix as a CAD boardfile and inflex kindly converted it into BVR format and generated a board outline. You will need FlexBV or possibly OBV to open it....
-
Hello,
Ive finally just purchased Flex BV. Ive been hesitant to purchase Flex BV due to the lack of liturature or youtube tutorials of the program basics.
What i am finding confusing is obtaining the most updated openboardview files.
https://github.com/inflex/OpenBoardData
This github page has the boardfiles available for download, but they seem like they may be out of date. It also says at the bottom that the project has moved to https://openboarddata.org/
https://openboarddata.org/
The problem when you go to openboarddata.org... -
Hey folks!
Boardview & schematic for both 820-01987 and 820-01949 models.
Board outlines were corrected (courtesy of Inflex).
Enjoy!
...
-
I've started a new open project to try collate together all the data that people usually generate when repairing boards, things like pin/network diode, voltage, and resistance measurements, as well as small notes about the specific data.
ie, on Macbooks, 820-00165, PPBUS_G3H needs to typically be 8.6V, and if it's lower, then usually you have to look around the SMC area.
The project is available at - https://github.com/inflex/OpenBoardData
Very early days yet but it'll hopefully grow in to a considerable resource over time.
As yet, FlexBV... -
Just a notice to people out there looking for an alternative to the existing boardview software for BRD, BRV and FZ files.
Youtube video showing it in action: https://www.youtube.com/watch?v=Fq97L6jjeUo
Linux users can pull the git repo and build locally ( instructions on the git page ).
Windows users can get the binary directly (Windows 7, 8, 10).
There's a LOT of features added in this fork relative to the original OBV release, thanks to the work of a couple of people.
You don't need to install it, just run the binary...
Comment