Hp 430 G8 EndPoint Security Controller Problem

[elaid]

HI badcaps members

in the first time i got pc with password i tried to remove it by dumping bios from chips.

i got this error after i changed the original dump from this chip " GD25Q256C "
with another one from the internet because the original chip was broken ..

MX25L25633F is the original dump from the motherboard

GD25Q256C i got from internet

[hoaca388]

Re: Hp 430 G8 EndPoint Security Controller Problem

HI badcaps members

in the first time i got pc with password i tried to remove it by dumping bios from chips.

i got this error after i changed the original dump from this chip " GD25Q256C "
with another one from the internet because the original chip was broken ..

MX25L25633F is the original dump from the motherboard

GD25Q256C i got from internet

Removing the password for current HP models cannot be done easily just by replacing the bios file, I guess the password is still there and you have more trouble with " Security Endpoint..". You need to find another 16MB or 32MB chip on your device to remove the password.

[elaid]

Re: Hp 430 G8 EndPoint Security Controller Problem

Removing the password for current HP models cannot be done easily just by replacing the bios file, I guess the password is still there and you have more trouble with " Security Endpoint..". You need to find another 16MB or 32MB chip on your device to remove the password.

Pc now working without password.
I installed new windows but this message annoyed when i start the pc..

[hoaca388]

Re: Hp 430 G8 EndPoint Security Controller Problem

Pc now working without password.
I installed new windows but this message annoyed when i start the pc..

Here

[elaid]

Re: Hp 430 G8 EndPoint Security Controller Problem

Here

Thanks work good

[Mahesa09]

Re: Hp 430 G8 EndPoint Security Controller Problem



Here

bro help me please.
bios pasword
hp 440 g8
sn 5CD139124G

[SMDFlea]

bro help me please.
bios pasword
hp 440 g8
sn 5CD139124G

Off topic. This thread is for the 430 G8