Unowhy Y13 BIOS Password Request

[merloiiin]

Hello I have a locked UNOWHY 13 laptop that I would like to reboot with a USB; can anyone help?

Serial number: IFP327139310
Production date: july 2023
BIOS version: JS116_V0.20.15
model: Y13G113S4EI
Mother board number: EM_JS116_200B_ENE_V1.0

Thanks a lot

[XNJ]

Hello,
Since I have desactivated fastboot, my computer doesn't start.
SN: IFP050029410
Motherboard : EM_IG116_366B_ENE_V2.0
BIOS chipset : GigaDevice 25LB64CVIG
Here there is the BIN file, I tried to reactivate fastboot on the file with AMIBCP but it still doesn't work.
Could you tell me what is wrong?

[lapfix]

Hello I have a locked UNOWHY 13 laptop that I would like to reboot with a USB; can anyone help?

Serial number: IFP327139310
Production date: july 2023
BIOS version: JS116_V0.20.15
model: Y13G113S4EI
Mother board number: EM_JS116_200B_ENE_V1.0

Thanks a lot

Upload the bios !

[merloiiin]

Upload the bios !

Sorry in advance, I'm very new to all of this and super lost; how do I upload my BIOS? I tried to install a universal extractor to get it in a .bin file, but I don't have administrator rights to install basically anything

[peste]

Sorry in advance, I'm very new to all of this and super lost; how do I upload my BIOS? I tried to install a universal extractor to get it in a .bin file, but I don't have administrator rights to install basically anything

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...l=ThisIsHow

[merloiiin]

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...l=ThisIsHow

Too bad, I don't have the materials to solder/unsolder the chip (and if I have to pay someone for it, that defeat the purpose of doing it by myself…) Thank you for you help anyways
I found a tutorial to flash the bios (by taking off the backplate and short-circuit the eMMC) specifically for the 2023-2024 gen of Unowhy; I'm thinking about trying that. Hopefully I won't brick the pc in the process!

[martingheorghita]

Please i need password for BIOS UNOWHTY Y13 ÎLE DE FRANCE
model: Y13G010S4EI
sn: IFP045001537
bios version: V0.5.0_P1S0M2E0F3L6B0T0P2G00A0U0D601_ENE
motherboard model: MG133(EM_IG116_366B_ENE_V2.0)
bios date: 10/28/2020
Motherboard : EM_IG116_200b_ene_F_V1.0.


Cannot boot to USB after Factory Reset (only if there is a key combination to do so), don't have the tools to unsolder the chip.
BIOS and EEPROM .bin file in attach.

I can upload some photos of MB if needed

Thanks in advance !

P.S. F8Hv4U3T67 doesn't work, I also tried another 7 passwords for 2021 Unowhy.

[martingheorghita]

Please i need password for BIOS UNOWHTY Y13 ÎLE DE FRANCE
model: Y13G010S4EI
sn: IFP045001537
bios version: V0.5.0_P1S0M2E0F3L6B0T0P2G00A0U0D601_ENE
motherboard model: MG133(EM_IG116_366B_ENE_V2.0)
bios date: 10/28/2020
Motherboard : EM_IG116_200b_ene_F_V1.0.


Cannot boot to USB after Factory Reset (only if there is a key combination to do so), don't have the tools to unsolder the chip.
BIOS and EEPROM .bin file in attach.

I can upload some photos of MB if needed

Thanks in advance !

P.S. F8Hv4U3T67 doesn't work, I also tried another 7 passwords for 2021 Unowhy.

I finally managed to read the UEFI using CH341 clip.
So, now I need a .bin file free of password.
Attached the file readed yesterday.
Any suggestions ?

Thanks in advance !

[hoaca388]

I finally managed to read the UEFI using CH341 clip.
So, now I need a .bin file free of password.
Attached the file readed yesterday.
Any suggestions ?

Thanks in advance !

Unlocked

[martingheorghita]

Unlocked

Thank you a lot !
I will write it this evening.

[martingheorghita]

Thank you a lot !
I will write it this evening.

As I said I write Bios and no password at boot and the laptop works fine.
Unfortunately the USB 2.0 and camera don't work (as initially ) and it requires password when I try to enter in Bios Settings.
Is there a default password??

[hoaca388]

As I said I write Bios and no password at boot and the laptop works fine.
Unfortunately the USB 2.0 and camera don't work (as initially ) and it requires password when I try to enter in Bios Settings.
Is there a default password??

Again