Microsoft Surface laptop 4 UEFI password

[mhmed2090]

enjoy

thank you but the password not removed

[SMDFlea]

thank you but the password not removed

try this one.

[mhmed2090]

try this one.

thank you but the password still not removed

[Maxpower3]

thank you but the password still not removed

try

[mhmed2090]

try

working perfect thank you

[SMDFlea]

try

by comparing your file i can see where i went wrong. My script didn`t work with IPCVN ,it`s changed it`s a little bit different now compared to what it used to be.. i think.

[has don]

SURFACE 4 1951
system password locked
s/n 034845414457
i5/256gb/8gb

[Maxpower3]

SURFACE 4 1951
system password locked
s/n 034845414457
i5/256gb/8gb

try

[has don]

try

thanks bro working good

[yasin]

hi . surface laptop4 lucked bios plz help
model >1951
s\n > 0f3g4vx24033fb

[shiyab]

hi . surface laptop4 lucked bios plz help
model >1951
s\n > 0f3g4vx24033fb

hi try

[yasin]

thnks shiyab unluck ok

[kanani.mx]

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*:
https://www.badcaps.net/forum/showthread.php?t=103570

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 )

hiiiii
I have a surface laptop 4 1950 with bios uefi password
can you remove the password please?
serial number: 050317513657

[shiyab]

hiiiii
I have a surface laptop 4 1950 with bios uefi password
can you remove the password please?
serial number: 050317513657

hi try

[hichamhb]

surface laptop 4 1951

SN: 054235214557

Please Remove the password

[volinakis]

surface laptop 4 1951

SN: 054235214557

Please Remove the password

try

[hichamhb]

try

It's working thank you for your help

[sarltap]

suf laptop pass 05065141457

[bernqrd]

surface laptop 4 1951

SN: 05065141457

BIOS CORRUPTED Please help me

[Plato888]

No. I can't access my hard drive now. I can start to load Windows from usb but there's nowhere to write it to. I might put back the original firmware as I can't find anything wrong with my soldering.

It must have been my soldering or disassembly as I've now put the original firmware back and I'm getting a message about no bootable device being detected in uefi... FFS!!!